Page 2 of 4 FirstFirst 1234 LastLast
Results 11 to 20 of 39
Like Tree24Likes

Thread: The Official Genuine Budget Hardware Project Index thread

  1. #11
    AVF Regular
    Join Date
    Mar 2013
    Location
    CQ
    Posts
    3,629

    The Vulcan - credit to JimJamzz for OP

    Name: The Vulcan
    Description:
    The Vulcan RDA is a three-piece design dripping atomizer that was built from a foundation of functionality and quality: A top and bottom heat fins that make sense! With the bottom base/fin carved out of a single solid piece of stainless steel, heat-dissipation has gone to a whole new level! No more over-heating MODs due to long draws. A unique air-vent and AFC design that brings the vents closer to the coils. Super-deep juice well that under passes the two side posts allowing maximum space utilization. The result is a product of quality you should expect and desire from a Japanese CNC perfectionist Producer.
    Price: $60 US ($64 AUD)
    Other Costs (Postage):
    Variable on where you get it
    Suggested Builds:
    Standard cotton dual coil set up
    Comments:
    Value!
    Where to buy:
    Plenty of places stocking it sadly the only one I know of that ships to Aus is out of stock . Vulcan RDA Rebuildable Atomizer
    Pictures:


    gsdl likes this.

  2. #12
    AVF Regular
    Join Date
    Mar 2013
    Location
    CQ
    Posts
    3,629

    Smok Dripper - credit to LuntingSir for OP

    Name: Smok Dripper
    Description: 14.3mm rebuildable dripper
    Price: US$6.57
    Other Costs (Postage): N/A
    Suggested Builds: Single micro coil with silica or cotton
    Comments: Stock air hole with the reduced chamber means this is a flavour machine.
    Where to buy: FastTech
    Pictures:

  3. #13
    AVF Regular
    Join Date
    Mar 2013
    Location
    CQ
    Posts
    3,629

    The Ant by Holy Land Mods - credit to <--cop for OP

    Name:
    The Ant by Holy Land Mods

    Description:
    Ant is a high quality ultra-compact 18350 mechanical mod with internal hybrid connector with adjustable positive pin and magnetic switch.
    Material: 303 Stainless Steel
    Switch Contact Material: 24K Gold-plated Brass
    Hybrid Connector Washer Material: 24K Gold-plated Brass
    Hybrid Connector Insulator Material: Delrin
    Hybrid Connector Adjustable Positive Pin Material: 24K Gold-plated Brass
    Switch Type: Magnetic
    Threading: 20x1
    Diameter: 22 mm
    Height: 46 mm (in 18350 mode)
    Weight: 47 g

    Price:
    Basic kit (18350 tube) matte finish - $ 80.
    Polishing - $ 10.
    Tube 18490 (matte) - $ 16.
    Tube 18650 (matte) - $ 20.
    Polishing tube - $ 10 / pc.
    Paypal 5%
    Shipping 5$

    Where to buy:
    Facebook or send e-mail to kabat33@gmail.com

    Pictures:





  4. #14
    AVF Regular
    Join Date
    Mar 2013
    Location
    CQ
    Posts
    3,629

    Gus V2 - credit to lheamfrg for OP

    Name: Gus V2
    Description: 18350 tube mechanical mod (available in 18500 and 18650)
    Price: 39.90 ($58 Aud)
    Other Costs: Freight may vary and depends where you purchase it from
    Suggested Builds:
    Comments: There are newer versions of the Gus that just tip the $100 mark. They are available in polished, sanded and matte finishes.
    Where to buy: GUS Battery case Core G22-18350 v2 polish [100-C1010] - &euro;39.90 : Gus-mod&more...!, An idea made material. Also available at many resellers world wide
    Pictures:


  5. #15
    AVF Regular
    Join Date
    Mar 2013
    Location
    CQ
    Posts
    3,629

    DID atomizer from MMV - credit to <--cop for OP

    Name: DID atomizer from MMV

    Description:
    Τhe DID is a genesis style repairable genesis atomizer, meaning that the user is able to fine-tune the performance of the device to meet their exact demands. The design process that went into crafting the DID focused on the basis of simplistic elegance. In our quest to fulfill that objective, we engineered a device that is so structurally sound that it will hold up to constant use and abuse from the toughest consumers, is aesthetically pleasing enough to fit right in at a black tie event, and performs at a level that will more than satiate even the most discerning of vapers. The entire device can be disassembled into its individual components, which makes cleaning and maintenance a simple procedure. The DID is also one of the only, if not THE ONLY repairable genesis atomizer that is readily available for purchase on a secure, legitimate website, so our customers can order at their convenience rather than indefinitely sitting on a waiting list or braving the uncertainty of tying up large sums of money in risky co-ops.

    The Standard DID (D20) comes stock with all stainless steel contacts, though users do have the option of purchasing a set of brass contacts if they so desire.

    Available with pyrex or stainless steel tanks.

    The Standard DID (D20) features an approximately 3.5ml juice capacity.
    The wick hole is 3.5mm
    The airhole in the stock top cap is 1.2mm

    The Short-DID (D20) features an approximately 2.0ml juice capacity.
    The wick hole is 3.5mm
    The airhole in the stock top cap is 1.2mm

    The Mini-DID (D14) features an approximately 2.0ml juice capacity.
    The wick hole is 2.8mm
    The airhole in the stock top cap is 1.2mm

    Price:
    66 or AUD$97

    Where to buy:
    DID Atomizers | mmvapors.com

    Pictures:




  6. #16
    AVF Regular
    Join Date
    Mar 2013
    Location
    CQ
    Posts
    3,629

    Hamoriko SS - credit to <--cop for OP

    Name:
    Hamoriko SS

    Description:
    Hamoriko is a small mechanical battery mod made by Chels.

    Some facts about it:
    Made of SS 303
    Diameter: 22 mm
    Height with 18350 tube: 63 mm including button
    Height with 18500 tube: 81 mm including button
    Weight with 18350 tube and without a battery: ~82 gr
    Connector: 510. Made of SS with adjustable brass central pin.
    Button: SS with brass central pin. Can be locked.
    Tube has satin finish
    Top cap has cuts to allow using atomizers with an air hole in the connector
    The tube is symmetrical, threads on both ends are the same: 20 x 1

    Hamoriko is extremely small.
    Base version has 18350 tube, but 18500 tube (sold separately) allows to use Hamoriko with the Kick.

    Price:
    $50

    Where to buy:
    Hamoriko SS (shipping in 30-45 days) - Mini ECIG

    Pictures:








  7. #17
    AVF Regular
    Join Date
    Mar 2013
    Location
    CQ
    Posts
    3,629

    Smoktech RSST - credit to Altered1 for OP

    Name: SMOKTECH RSST
    Description: Gennie Style Tank Atty
    Price: $35
    Other Costs: Postage
    Suggested Builds: Micro Coil, wick with cotton, SS rope, mesh, whatever
    Comments: Insulated wick hole, may want to dril out air hole. Easy connection to positive post, adjustable pin, 510 connection. Latest version has pyrex tank
    Pictures:

  8. #18
    AVF Regular
    Join Date
    Mar 2013
    Location
    CQ
    Posts
    3,629

    The eXpromizer - credit to <--cop for OP

    Name:
    The eXpromizer

    Description:
    The eXpromizer has been designed for easy and comfortable handling. No tools are required for refilling your eliquid or airflow control.
    The Expromizer uses a vacuum principle which reduces afterflow problems. The Expromizer has a collector tank for excess liquid, thus preventing leakage.
    This capacity of the tank is 4.5 ml which makes this great atomizer perfect for everyday use.

    Changes in Version 1.1:
    - new Drip Tip
    - new Top Cap with tighter fit for drip tips
    - new O-Ring to help against leaks
    - Stainless Steel Center Screw
    - new Air Flow Control (No Tools required)
    - Silicone Insulators instead of plastic
    - Standard Version comes with clear tank instead of frosted tank.

    Features:
    - Very simple to fill without tools
    - sprung positive pole
    - Tank & Cotton use

    Here is a breakdown:

    1 x eXpromizer Atomizer set consisting of:
    - DripTip - Stainless Steel
    - Top Cap - Stainless Steel
    - Tank - PC
    - Base - Stainless Steel
    - Collector tank with Air control Ring- Stainless Steel
    - O rings

    Accessories:
    - 1 Screwdriver
    - 1 set of replacement O rings
    - 1 pair of replacement screws

    Price:
    $79.95

    Where to buy:
    eXpromizer RBA V1.1

    Pictures:




  9. #19
    AVF Regular
    Join Date
    Mar 2013
    Location
    CQ
    Posts
    3,629

    Atmistique Diver V2 - credit to <--cop for OP

    Name:
    Atmistique Diver V2

    Description:
    The Diver V2 is a rebuildable atomizer and is identical in size to a type 510 cartomizer making it ideal for use in cartomizer type tanks such as the Scuba.
    It can also be used as a dripper with the Grail body which is sold separately for $30.

    Price:
    $60

    Where to buy:
    Vaperev Shop - Atmistique Diver V2 - Rebuildables

    Pictures:







    fungusfiend likes this.

  10. #20
    AVF Regular
    Join Date
    Mar 2013
    Location
    CQ
    Posts
    3,629

    Colonial Mod by Mad Industries - credit to newvape for OP

    Name: Colonial Mod by Mad Industries
    Description: 6061 T6 BILLET ALUMINUM MOD 18650
    Price: $100
    Other Costs (Postage): Postage will vary
    Suggested Builds:
    Comments:
    *Tips the $100 mark when including postage.*
    .900 DIA
    6061 T6 BILLET ALUMINUM MOD - MONOBLOCK CONSTRUCTION
    BEAUTIFUL CONCAVE BUTTON - SPRING
    101 COPPER CONTACTS TOP AND BOTTOM
    TELESCOPING TOP SCREW SET W/ DELRIN INSULATOR
    PACKAGING INCLUDES ENGRAVED TIN AND CERTIFICATE OF AUTHENTICITY
    Where to buy: Pre-order at VaperySitty
    Pictures:


 

 
Page 2 of 4 FirstFirst 1234 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBulletin® Version 4.2.4
Copyright © 2019 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO 3.6.0
All times are GMT +11. The time now is 03:45 PM.