Page 1 of 2 12 LastLast
Results 1 to 10 of 17
Like Tree11Likes

Thread: Eleaf is rubbish

  1. #1
    AVF Regular
    Join Date
    Feb 2012
    Location
    Brisbane
    Posts
    397

    Eleaf is rubbish

    Is anyone else getting the "Atomizer Short", "Protection" errors when trying to vape? It happens with everything I put on it, clearomisers, tanks with cartomisers, all in one tanks etc etc. It started off really good, but now it is shit.
    Not responsible.... Ever.





  2. #2
    AVF Regular
    Join Date
    Jul 2014
    Location
    Melbourne
    Posts
    190
    My brother was having that happen to his iStick, he was screwing his atty on too tight and eventually it was shorting I guess. I fixed it for him by gently prying the center pin out slightly.

  3. #3
    AVF Regular
    Join Date
    Oct 2014
    Location
    Hobart, TAS
    Posts
    206
    I've only had mine for a day but it's working as intended.

    I assume you've checked to make sure there's nothing shorting the 510 connector?

    Other possibilities:
    - Over-tightening the attys, which pushes the centre pin down too far (you may have to pull/push it back up a bit)
    - It's possible a wire to the 510 may have broken off inside and is shorting to the case (I think you can pop the top off and have a quick look)
    ---



  4. #4
    AVF Regular
    Join Date
    Oct 2014
    Location
    Hobart, TAS
    Posts
    206
    RedDevil beat me to it with the over-tightening ...
    ---



  5. #5
    AVF Regular
    Join Date
    Apr 2014
    Location
    Melbourne
    Posts
    158
    I had the same issue with the atomizer short message the other day with my Istick, took the mini nautilus off off and threw it on the provari, still got error message. Took it all apart and cleaned it, all working fine now.
    steve.c likes this.

  6. #6
    AVF Regular
    Join Date
    Aug 2014
    Location
    Melbourne
    Posts
    1,089
    I found one of the 510/ego adapters was dodgy on both of my isticks. If you are using one of these, that might be why.

    All the local vendors sell them for about $3.00. Once I got the new adapters all was good.

  7. #7
    AVF Regular
    Join Date
    Oct 2014
    Location
    Melbourne, Sunbury
    Posts
    645
    mybe when the bending adapter for the istick comes out in Australia it my fix the problem of the centre pin
    Snidely_Whiplash likes this.

  8. #8
    Senior Member
    Join Date
    Oct 2014
    Location
    Mornington Peninsula
    Posts
    328
    ive been chain vaping on mine for 2 weeks or more with a Kanger MOW tank and sometimes with a Fogger.
    No problems so far.
    I keep the 510 attachment on at all times.

  9. #9
    AVF Regular
    Join Date
    Dec 2013
    Location
    Marrickville NSW
    Posts
    2,949
    I've never used the 510 attachment.
    The istick is my take out battery, with a Silo tank attached directly to it.
    It gets thrown around or put in my pocket and knocked about.
    The settings have changed when it's been in my pocket, but it's been a great little device.
    I'm very happy with it.
    mrs308hjute and leec like this.

  10. #10
    AVF Regular
    Join Date
    May 2014
    Location
    Bendigo
    Posts
    150
    The istick is my all day every day battery and like disley it gets knocked about on a regular basis. I love it, even with it's little quirks and I'm going to buy another, so I have 2 to take to Vietnam.
    mrs308hjute and disley like this.

 

 
Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBulletin® Version 4.2.4
Copyright © 2019 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO 3.6.0
All times are GMT +11. The time now is 10:52 PM.