Results 1 to 5 of 5
Like Tree1Likes
  • 1 Post By JV321

Thread: Coil compatibility questions

  1. #1
    AVF Newbie | Be nice to me
    Join Date
    Feb 2015
    Location
    South Australia
    Posts
    87

    Coil compatibility questions

    Hello I'm new!

    Will these coils work with a vision spinner 2? (clone)

    Also I would like to get some replacement coils for this would these work? and what Ohm should I get? 1.8 Ohm?

    I read the descriptions on the items I posted above and I believe they will be compatible but I thought I would ask first. I also asked fast tech about the matter but I have yet to hear back from them.

    Any help is as always much appreciated

  2. #2
    AVF Regular
    Join Date
    Nov 2014
    Location
    North Shore, NSW
    Posts
    435
    The first part of the question: What tank do you plan on putting on the vision spinner 2? The spinner is the battery source. You need a tank to put on the battery source.

    Second part, yes, the evod coils will work with the evod tank.

    1.8ohm coils should be fine. You can get both and see which you prefer (I personally never noticed any sort of difference between the 1.8ohm evods and the 2ohms).
    MrGruffy likes this.

  3. #3
    Senior Member
    Join Date
    Sep 2013
    Location
    Launceston Tasmania
    Posts
    153
    Yes it should work since the coil is for a kanger Evod tank. What you do is unscrew the bottom of the tank then unscrew the old coil off and put that one on. A 1.8 ohm would be ideal because it burns your liquid faster at a lower voltage. Since you cannot adjust the voltage i would recommend a 1.8 ohms coil because ego batteries are normally set between a 3.3V - 3.8V. if you have it at a higher ohm coil then you will need to take longer drags to get the same effect.

  4. #4
    AVF Newbie | Be nice to me
    Join Date
    Feb 2015
    Location
    South Australia
    Posts
    87
    Quote Originally Posted by JV321 View Post
    What tank do you plan on putting on the vision spinner 2?
    Silly me. A kanger protank 3 mini. Thanks for the help

    Quote Originally Posted by itslilox View Post
    Yes it should work since the coil is for a kanger Evod tank.
    Good to hear. Thanks for the help

  5. #5
    AVF Regular
    Join Date
    Nov 2014
    Location
    North Shore, NSW
    Posts
    435
    It says in the link what tanks those coils fit, and the mini protank 3 is one of them:

    "Details:
    Fits for Kanger Aerotank, Protank 3, Mini Protank 3, eVod 2, T3D"

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBulletin® Version 4.2.4
Copyright © 2019 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO 3.6.0
All times are GMT +11. The time now is 05:08 PM.