Results 1 to 10 of 10
Like Tree2Likes
  • 1 Post By disley
  • 1 Post By J_B_86

Thread: Eleaf Lemo ll

  1. #1
    Member
    Join Date
    Dec 2014
    Location
    Sydney, Australia
    Posts
    41

    Eleaf Lemo ll

    Eleaf Lemo II Rebuildable Atomizer Kit - 3.8ml, Silver

    Looks pretty nice, Seems to be top/side fill with adjustable airflow on the outside this time around. I'm a fan of the Lemo and Lemo drop, hopefully this is a slight improvement on an already great RTA.

    It is on pre-order atm, not sure when the actual release date for them is.

  2. #2
    AVF Regular
    Join Date
    Dec 2013
    Location
    Marrickville NSW
    Posts
    2,949
    The Lemo's are back on my favourites list again.
    I have two standard Lemo's both used everyday.
    They sat on the shelf for a couple of weeks, while I tried new clearo sub ohm tanks.
    Anyway I picked one up again and remembered why I enjoyed them so much.
    Let me know how this new one goes if you get it?
    The early Lemo's were let down by the filling screw.
    I use the nobbly washers now to stop the fill hole from leaking.
    Last edited by disley; 11-03-15 at 03:45 PM.
    Imho likes this.

  3. #3
    AVF Regular
    Join Date
    Jul 2014
    Location
    Sydney
    Posts
    508
    I like the changes of airflow on the outside fill port on top is nice if it works...
    But I have to say at least in that photo it looks butt ugly

  4. #4
    AVF Regular
    Join Date
    Dec 2013
    Location
    Marrickville NSW
    Posts
    2,949
    I may get one when they become available.
    I'll wait to see if any Aussie vendors pick them up.

  5. #5
    Member
    Join Date
    Dec 2014
    Location
    Sydney, Australia
    Posts
    41
    Quote Originally Posted by nanokatz View Post
    I like the changes of airflow on the outside fill port on top is nice if it works...
    But I have to say at least in that photo it looks butt ugly
    Yes, the outer tank section has had a complete redesign by the looks of it, it looks nothing like the original lemo, even the drip tip is a completely different style. Looks like the inners are the same, hopefully they have not changed too much inside, that is the part that really counts.

    But I am with you, it is not the best looking RTA around.

  6. #6
    AVF Regular
    Join Date
    Jun 2014
    Location
    Townsville
    Posts
    1,417
    The Lemo is by far my favourite tank so I was excited when I saw Lemo II. Its pretty ugly but I don't really care as long as it has good flavour like the original. That fill port looks like a bad idea though, looks like you basically open that slot at the top and fill through there so there's no way you'll be able to fill it completely and losing the vacuum in the tank and filling it while standing up is almost sure to cause leaking.
    subsist likes this.

  7. #7
    AVF Regular
    Join Date
    Jan 2015
    Location
    Melbourne VIC
    Posts
    1,183
    Hmmmm intresting. I wanna try it...

  8. #8
    AVF Regular
    Join Date
    Aug 2013
    Posts
    141
    Will be interesting to see how it goes. I am loving my 2 Lemos.

    Disapointed that it drops in capacity.

  9. #9
    AVF Regular
    Join Date
    Dec 2013
    Location
    Marrickville NSW
    Posts
    2,949
    I don't fill mine past three quarters full.
    I find they vape better when I leave space in the tanks.

  10. #10
    AVF Regular
    Join Date
    Oct 2014
    Location
    Hobart, TAS
    Posts
    206
    Quote Originally Posted by disley View Post
    The Lemo's are back on my favourites list again.
    I have two standard Lemo's both used everyday.
    They sat on the shelf for a couple of weeks, while I tried new clearo sub ohm tanks.
    Anyway I picked one up again and remembered why I enjoyed them so much.
    Let me know how this new one goes if you get it?
    The early Lemo's were let down by the filling screw.
    I use the nobbly washers now to stop the fill hole from leaking.
    Jeez Disley, you're in my head. I just went through the same process, although the filling screws haven't leaked on me yet. For convenience I still use the subtank mini or nano at work but the rest of time it's back to the Lemo.
    ---



 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBulletin® Version 4.2.4
Copyright © 2019 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO 3.6.0
All times are GMT +11. The time now is 12:03 PM.