Page 1 of 2 12 LastLast
Results 1 to 10 of 20
Like Tree7Likes

Thread: Mod for me

  1. #1
    AVF Regular
    Join Date
    Nov 2015
    Location
    Adelaide
    Posts
    605

    Mod for me

    OK i am looking for a mod that has a few specific functions and not sure what has them all so any suggestions would be great. Im thinking it will end up being a dna200 but not sure.

    No1. I would like it to be a minimum dual battery or equivalent lipo for the daily grind.

    No2. I would like to be able to adjust the Ohm's, or the mod read them corectly as I find a build/coil will read correct on checker, say 0.25, then on the mod will be 0.28 so would like to adjust this.

    No3. Support for SS temp control

    No4 The ability to store settings for different tanks

    Side note, I'm using Crowns and a freemax starre maybe pushing 70watts at MAX but finding a dual batt mod or equivalent will be the task.

    Im sure there are somethings I've missed but will add as they arise. At the moment the above mentioned are a must if possible.

    Thanks in advance for your thoughts.

  2. #2
    AVF Regular
    Join Date
    Dec 2012
    Location
    SA
    Posts
    5,188
    you wont ever find a mod that can change the Ohms of the build you have
    RIP 22.12.2016

  3. #3
    AVF Regular
    Join Date
    Nov 2015
    Location
    Adelaide
    Posts
    605
    Hmm, i thought I'd read somewhere ontheline (yes a movie reference)of one you could.

  4. #4
    AVF Regular
    Join Date
    Apr 2015
    Location
    Brunswick East
    Posts
    636
    Stainless steel is becoming more and more important to me.

  5. #5
    AVF Regular
    Join Date
    Nov 2015
    Location
    Adelaide
    Posts
    605
    Seems the interweb says you can on a xcube 2, anyone confirm?

  6. #6
    AVF Regular
    Join Date
    Nov 2015
    Location
    Adelaide
    Posts
    605
    Quote Originally Posted by Mr Young View Post
    Stainless steel is becoming more and more important to me.
    Me to. It seems to be giving me the best results in TC or VW
    Mr Young likes this.

  7. #7
    AVF Regular
    Join Date
    Apr 2015
    Location
    Brunswick East
    Posts
    636
    Quote Originally Posted by Tyzer View Post
    Me to. It seems to be giving me the best results in TC or VW
    I betcha Keith is all over it.

  8. #8
    AVF Regular
    Join Date
    Jan 2015
    Location
    Melbourne, Vic
    Posts
    620
    Quote Originally Posted by Tyzer View Post
    Seems the interweb says you can on a xcube 2, anyone confirm?
    Correct! It can adjust the intial resistance so you can fine tune it so it's correct.
    Tyzer likes this.



    Antiquis temporibus, nati tibi similes in rupibus vntosissimis exponebantur ad necem.

  9. #9
    Nut
    Nut is offline
    AVF Regular
    Join Date
    Jul 2015
    Location
    Townsville, QLD 4811
    Posts
    147
    Yeah mate the DNA 200 ticks all of your boxes except the changing ohms. I love my Efusion, granted it doesn't have battery capacity of the Wismec but it still lasts me 2 days as my sole-use mod and is sleek and easy to carry.
    You can lock the ohms via the software but not on the mod. I wish it had this feature, because even jumping up 0.01 ohms with SS drastically changes the vape. I'm not sure why my ohms seems to cold change by 0.01 throughout the day.
    disley and Tyzer like this.

  10. #10
    AVF Regular
    Join Date
    Feb 2015
    Posts
    5,140
    TreeBox also does the initial resistance (offset) adjustment (only used it once - free tip for best and most accurate results dont build SS coils below 0.5, i did a 0.4 SS build and had to use the initial resistance adjustment to try and compensate, but i gave up and just built a new 0.6 coil instead), Ni/Ti/SS and custom TCR. No atty lock on the chipset, but it works. Same chipset used in the Smok XCube Mini and Kooper 200w plus
    Last edited by stylemessiah; 04-02-16 at 09:20 AM.
    CCVaper likes this.
    Stylemessiah: Prince of all things small and whispery. Abhorrer of shoutiness. Shunner of all vigorousities.

    Pushing back against the vendor wall, one damn stupid post at a time...

    Not on as many ignore lists as you think....

    Handy shopping links:
    Mods With Issues (Often On Discounted Flash Sale) Last Updated 13/10/17

 

 
Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBulletin® Version 4.2.4
Copyright © 2019 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO 3.6.0
All times are GMT +11. The time now is 03:07 PM.