Results 1 to 4 of 4
Like Tree3Likes
  • 1 Post By <---cop
  • 1 Post By CMB
  • 1 Post By Noe

Thread: My alternative to syringes for Gennies

  1. #1
    Senior Member
    Join Date
    Nov 2011
    Location
    Australia
    Posts
    4,055

    My alternative to syringes for Gennies

    I hate syringes. They make me feel like a junkie.
    And those needle nose bottles have stabbed me as well so I've given them all away.

    I was in the chemist tonight and saw these eye droppers.
    They are made of glass and were only $5 for the pair.
    The tip is narrowed to a small point that I can just fit the tip in the Orions tiny wick hole and fill.
    For something with a larger wick hole they would be even easier.






    Problem solved.
    lastchance likes this.

  2. #2
    AVF Regular
    Join Date
    Oct 2011
    Location
    livin next door ta Allen
    Posts
    596
    another non junke look is to use silicon bottle nipples dont know where to get'em but I have some that came on Liqua brand juice they have a fine slightly longer flexible point and inject into aga / tanks ect no probs very clean to use and fit better by silicon goin into neck an also clip'in the rim of standard 10-30 ml securely unlike the plastic one s that clip over the rim and can have a tendency to pop off under pressure or get caught by and removed with cap ...has happened to me a few times , I had a bad lot of the hard plastic nipples pop off while topping tanks ect spillin juice everywhere real pita
    Last edited by lastchance; 17-01-13 at 12:49 AM.
    Smokin no good A .




  3. #3
    CMB
    CMB is offline
    AVF Regular
    Join Date
    Mar 2012
    Location
    SW WA
    Posts
    4,336
    Quote Originally Posted by lastchance View Post
    another non junke look is to use silicon bottle nipples dont know where to get'em but I have some that came on Liqua brand juice they have a fine slightly longer flexible point and inject into aga / tanks ect no probs very clean to use and fit better by silicon goin into neck an also clip'in the rim of standard 10-30 ml securely unlike the plastic one s that clip over the rim and can have a tendency to pop off under pressure or get caught by and removed with cap ...has happened to me a few times , I had a bad lot of the hard plastic nipples pop off while topping tanks ect spillin juice everywhere real pita
    Those bottles are the way to go. Vapebar sell them, so does HC.
    lastchance likes this.

  4. #4
    Noe
    Noe is offline
    AV Approved Manafacturer/Modder Chief Snus scientist
    Join Date
    Jan 2011
    Location
    In the deep dark recesses of your mind! .. Prophet of the Vapeoligists & keeper of the sacred Bewdy.
    Posts
    13,140
    I find if what I am injecting juice with into my genny, doesn't leave room around the fill hole for air to escape, then I get juice coming out of the wick from the pressure of the juice going in the fill hole.
    The best non syringe I have found to fill with is the metal blunt needle type bottles, the plastic needle tip bottle I have still creates too much pressure, even though there is some room for air to escape, it just isn't enough that escapes.
    It could be I am filling too fast but with a 18gauge blunt needle I can fill as fast as I like & not lose a drop, using an eye dropper I'd lose half the juice trying to put it in
    studiovape likes this.
    Officially #1 Customer and Supporter of Essiemessy's Custom made Glass Drip Tips!
    Essie's Glass DTs

    Sent from my kickass gaming PC using keyboard & fingers.

    The Dahli Lama once said, "People do not laugh enough & take life too seriously, causing stress." A good laugh can cure a build up of stress, stress is a leading cause of grey hair & early death.

    Vape Hard or go home and Vape Hard!

    I'd rather be sneezing than wheezing!

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBulletin® Version 4.2.4
Copyright © 2019 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO 3.6.0
All times are GMT +11. The time now is 09:23 PM.