Results 1 to 8 of 8
Like Tree1Likes
  • 1 Post By studiovape

Thread: AGA questions

  1. #1
    AVF Regular
    Join Date
    Dec 2012
    Location
    Bottom of Mt Panorama
    Posts
    216

    AGA questions

    ok so while i wait for some extra bits n peices (mainly thinner resistance wire) to arrive i've had a lot of time to sit n look at my new AGA and i have noticed in the top it has 2 screw's. i know one is meant to be a filler hole but the extra one got me to thinking. is it possible to chuck a second wick and coil onto that second hole.

    now if it is possible what would it do in terms Ohms. Vapor. Throat hit. power usage ?

  2. #2
    Noe
    Noe is offline
    AV Approved Manafacturer/Modder Chief Snus scientist
    Join Date
    Jan 2011
    Location
    In the deep dark recesses of your mind! .. Prophet of the Vapeoligists & keeper of the sacred Bewdy.
    Posts
    13,140
    Which AGA ?
    The screw would need to be removed & hole drilled out to remove the threads.
    You would also need a 2nd air hole drilled in line with the 2nd wick.

    2 coils would mean lower ohm = higher power draw on your batts.
    As for vapor & TH, ask kritikal, he has already done this on an AGA-T.

    What gauge wire do you have now?
    I use 28G & 30G kanthal wire, lower gauge = thicker BTW.
    Officially #1 Customer and Supporter of Essiemessy's Custom made Glass Drip Tips!
    Essie's Glass DTs

    Sent from my kickass gaming PC using keyboard & fingers.

    The Dahli Lama once said, "People do not laugh enough & take life too seriously, causing stress." A good laugh can cure a build up of stress, stress is a leading cause of grey hair & early death.

    Vape Hard or go home and Vape Hard!

    I'd rather be sneezing than wheezing!

  3. #3
    Senior Member
    Join Date
    Feb 2012
    Location
    Mill Park, Victoria
    Posts
    767
    First, which AGA?

    Edit: Noe beat me to it

  4. #4
    AVF Regular
    Join Date
    Sep 2011
    Location
    Banksia Grove, Perth, WA
    Posts
    946
    Quote Originally Posted by Noe View Post
    Which AGA ?
    The screw would need to be removed & hole drilled out to remove the threads.
    You would also need a 2nd air hole drilled in line with the 2nd wick.

    2 coils would mean lower ohm = higher power draw on your batts.
    As for vapor & TH, ask kritikal, he has already done this on an AGA-T.

    What gauge wire do you have now?
    I use 28G & 30G kanthal wire, lower gauge = thicker BTW.
    What he said :-)

  5. #5
    AVF Regular
    Join Date
    Dec 2012
    Location
    Bottom of Mt Panorama
    Posts
    216
    the aga t2. yep wire works backwards (ie lower number thicker wire) i got 28 atm but its a no-go cause it makes it too low ohm's for my mod to operate it with a single coil so i got some 30G on the way

  6. #6
    Noe
    Noe is offline
    AV Approved Manafacturer/Modder Chief Snus scientist
    Join Date
    Jan 2011
    Location
    In the deep dark recesses of your mind! .. Prophet of the Vapeoligists & keeper of the sacred Bewdy.
    Posts
    13,140
    You should be able to use a 5/6 wrap coil with 28G to get a 1.2-1.3ohm coil.
    Not sure with the T2 because of the smaller wick hole but it should work out about right with that wrap.
    I use a T1 & have a 1.2ohm coil on it with a 4/5 wrap so with an extra wrap on the T2 the coil should work out about the same ohms. If it is still too low you could do a 6/7 wrap.
    Officially #1 Customer and Supporter of Essiemessy's Custom made Glass Drip Tips!
    Essie's Glass DTs

    Sent from my kickass gaming PC using keyboard & fingers.

    The Dahli Lama once said, "People do not laugh enough & take life too seriously, causing stress." A good laugh can cure a build up of stress, stress is a leading cause of grey hair & early death.

    Vape Hard or go home and Vape Hard!

    I'd rather be sneezing than wheezing!

  7. #7
    Noe
    Noe is offline
    AV Approved Manafacturer/Modder Chief Snus scientist
    Join Date
    Jan 2011
    Location
    In the deep dark recesses of your mind! .. Prophet of the Vapeoligists & keeper of the sacred Bewdy.
    Posts
    13,140
    This might help you too, find a drill bit the size of your wick hole & try it. Wrapping a coil on a drill bit or screwdriver shaft makes it very easy to get spacing even & make a larger coil.

    My new method of building wick & coil for AGA-T gennesis atty
    Officially #1 Customer and Supporter of Essiemessy's Custom made Glass Drip Tips!
    Essie's Glass DTs

    Sent from my kickass gaming PC using keyboard & fingers.

    The Dahli Lama once said, "People do not laugh enough & take life too seriously, causing stress." A good laugh can cure a build up of stress, stress is a leading cause of grey hair & early death.

    Vape Hard or go home and Vape Hard!

    I'd rather be sneezing than wheezing!

  8. #8
    AVF Regular
    Join Date
    Aug 2012
    Location
    Gympie Queensland
    Posts
    2,404
    Here is my dual wick AGA-t and some info for you.
    Most is applicable to the T2.
    Dual Wick Genesis Thoughts, Hints, Tips & Proven Setups
    davee likes this.
    Vaping since July 2012.

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBulletin® Version 4.2.4
Copyright © 2019 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO 3.6.0
All times are GMT +11. The time now is 02:42 AM.