Page 1 of 7 123 ... LastLast
Results 1 to 10 of 67
Like Tree63Likes

Thread: U-Can 18350 Mod/Hybrid

  1. #1
    AVF Regular
    Join Date
    Aug 2012
    Location
    Gympie Queensland
    Posts
    2,404

    U-Can 18350 Mod/Hybrid

    Hi Folks, you might haves seen the thread on ECF about making a 18350 dripper from the U-Can filler bottles.
    I had one kindly donated by Floorzone, and although it was a bit different in the plunger pin area (leading to a few extra hassles with the switch) I manages to make what you see here.
    I hate drippers as they are to much hassle to keep topping up and silica sucks IMO.
    If there is some interest I will post some internal pics and instructions, but really this is more for floorzone's benfit at this stage, to say thanks, and yep I could do somthing with it
    Sorry about the Iphone pics,can't find my Ixus.

    ZMax, U-Can/RSST 18350, Hybridised Natural/RSST 18350, Modded CHI CHI/DID 18500




    Small in my small grubby mits just after finishing (hence the grubby mits )

    Vaping since July 2012.

  2. #2
    AVF Regular
    Join Date
    Nov 2012
    Location
    Melbourne
    Posts
    1,309
    I am interested

  3. #3
    Super Moderator
    Join Date
    Jan 2012
    Location
    Whyalla, SA
    Posts
    13,095
    Yes please SV When I got my Ucans, I bought extra just so I could do something similar, so very interested in how you achieved it.
    Ignore the Super-moderator tag in my profile, I have resigned from that position but admin have not updated my profile as yet

  4. #4
    AVF Regular
    Join Date
    Mar 2013
    Location
    Wild Wild West
    Posts
    1,633
    Def interested got a few ucans sitting here and nothing to do with them

  5. #5
    AVF Regular
    Join Date
    Dec 2012
    Location
    Off grid, quietly hermity, NW Tas
    Posts
    6,476
    Also ditto


  6. #6
    Senior Member
    Join Date
    Feb 2012
    Location
    Mill Park, Victoria
    Posts
    767
    Ahh, an inventive mind and creative hands, looking forward to some pics

  7. #7
    AVF Regular
    Join Date
    Nov 2012
    Location
    Sydney
    Posts
    3,288
    Got 2 of these bastards and didn't know wtf to do with them. Share the info!
    bobbavet likes this.

  8. #8
    AVF Regular
    Join Date
    Mar 2011
    Location
    Sydney
    Posts
    5,466
    i have a few, and even though i will be lazy to do the mod myself, would be interested to see how you did it
    I have 50% Originals and 50% clones, am too lazy to try to change the world and bored with the whole debate

  9. #9
    Senior Member
    Join Date
    Feb 2013
    Location
    Victoria
    Posts
    373
    Clever. Would be interested to know how you did it
    Life is too short for genesis atomisers and pbusardo reviews.

  10. #10
    AVF Regular
    Join Date
    Aug 2012
    Location
    Gympie Queensland
    Posts
    2,404
    Ok It's pretty rough and ready but this is the gist. Sorry again for the crappy Iphone pics.
    Top section.




    1.drill hole for 510 connector from atty, tight a fit as possible to reduce slop.
    2.Grind down topcap to a flush fit with the topdeck of the body.
    3. Cut off top of old ego battery for 510 clamping nut.
    4. Remove internal silicone O-ring from inside top section
    cut section of brass rod (cant remember the size, but you can work it out) drill 2.55-2.65 mm hole through conter and tap with M3 tap, fill one end with drop of solder.
    5. Drop atty through hole in lid, center while clamping with ego battery threaded section.
    6. Screw brass bar onto RSST prodruding thread.

    Last edited by studiovape; 29-05-13 at 04:21 PM.
    Vaping since July 2012.

 

 
Page 1 of 7 123 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBulletin® Version 4.2.4
Copyright © 2019 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO 3.6.0
All times are GMT +11. The time now is 07:44 AM.