Results 1 to 3 of 3
Like Tree3Likes
  • 2 Post By Juzm
  • 1 Post By MrGruffy

Thread: Went full geek spec with ECDmeter & hyperterminal this arvo.

  1. #1
    Senior Member
    Join Date
    May 2013
    Location
    Melbourne
    Posts
    1,721

    Went full geek spec with ECDmeter & hyperterminal this arvo.

    Mrs was out, had to find something to do.



    If I'd done a proper job I would have logged and named each device for you.

    Terminal log file
    Date: 28/07/2013 - 1:30:14 PM
    -----------------------------------------------

    Stoney's ECDmeter V1.6 Nantucket

    ---------------------------------

    For more info visit VapeBrain

    Enter ? for optionsā

    Stabilising..


    PWM Vpeak = 5.353 V Vave = 4.516 V Vrms = 4.871 V

    Ppeak = 10.759 W Ptrue = 9.077 W

    Resistance = 2.583 ohm

    Duty Cycle = 84.37 % Freq = 55 Hz


    PWM Vpeak = 5.317 V Vave = 4.512 V Vrms = 4.891 V

    Ppeak = 10.299 W Ptrue = 8.740 W

    Resistance = 2.664 ohm

    Duty Cycle = 84.87 % Freq = 50 Hz


    PWM Vpeak = 5.353 V Vave = 4.583 V Vrms = 4.924 V

    Ppeak = 10.497 W Ptrue = 8.988 W

    Resistance = 2.649 ohm

    Duty Cycle = 85.63 % Freq = 50 Hz


    PWM Vpeak = 5.341 V Vave = 4.490 V Vrms = 4.860 V

    Ppeak = 10.473 W Ptrue = 8.805 W

    Resistance = 2.643 ohm

    Duty Cycle = 84.08 % Freq = 50 Hz


    PWM Vpeak = 5.329 V Vave = 4.522 V Vrms = 4.902 V

    Ppeak = 10.450 W Ptrue = 8.868 W

    Resistance = 2.637 ohm

    Duty Cycle = 84.87 % Freq = 42 Hz


    Stoney's ECDmeter V1.6 Nantucket

    ---------------------------------

    For more info visit VapeBrain

    Enter ? for optionsā

    Stabilising..


    PWM Vpeak = 5.353 V Vave = 4.558 V Vrms = 4.924 V

    Ppeak = 10.497 W Ptrue = 8.939 W

    Resistance = 2.649 ohm

    Duty Cycle = 85.16 % Freq = 56 Hz


    PWM Vpeak = 5.341 V Vave = 4.494 V Vrms = 4.860 V

    Ppeak = 10.473 W Ptrue = 8.814 W

    Resistance = 2.643 ohm

    Duty Cycle = 84.16 % Freq = 50 Hz


    PWM Vpeak = 5.281 V Vave = 4.481 V Vrms = 4.858 V

    Ppeak = 10.229 W Ptrue = 8.681 W

    Resistance = 2.646 ohm

    Duty Cycle = 84.87 % Freq = 50 Hz


    Stoney's ECDmeter V1.6 Nantucket

    ---------------------------------

    For more info visit VapeBrain

    Enter ? for options


    Stoney's ECDmeter V1.6 Nantucket

    ---------------------------------

    For more info visit VapeBrain

    Enter ? for options

    Stabilising..


    Linear Vin = 4.006 V

    Pave = 7.663 W

    Resistance = 2.014 ohm


    Linear Vin = 4.006 V

    Pave = 7.663 W

    Resistance = 2.014 ohm


    Linear Vin = 4.018 V

    Pave = 7.686 W

    Resistance = 2.020 ohm


    Linear Vin = 4.018 V

    Pave = 7.686 W

    Resistance = 2.020 ohm


    Linear Vin = 4.006 V

    Pave = 7.663 W

    Resistance = 2.014 ohm


    Linear Vin = 4.018 V

    Pave = 7.686 W

    Resistance = 2.020 ohm


    Linear Vin = 4.006 V

    Pave = 7.663 W

    Resistance = 2.014 ohm


    Stoney's ECDmeter V1.6 Nantucket

    ---------------------------------

    For more info visit VapeBrain

    Enter ? for optionsā

    Stabilising..


    Linear Vin = 4.006 V

    Pave = 7.663 W

    Resistance = 2.014 ohm


    Linear Vin = 4.006 V

    Pave = 7.663 W

    Resistance = 2.014 ohm


    Linear Vin = 4.018 V

    Pave = 7.686 W

    Resistance = 2.020 ohm


    Stoney's ECDmeter V1.6 Nantucket

    ---------------------------------

    For more info visit VapeBrain

    Enter ? for optionsā

    Stabilising..


    Linear Vin = 3.994 V

    Pave = 7.640 W

    Resistance = 2.007 ohm


    Linear Vin = 4.006 V

    Pave = 7.663 W

    Resistance = 2.014 ohm


    Linear Vin = 4.006 V

    Pave = 7.663 W

    Resistance = 2.014 ohm


    Linear Vin = 4.018 V

    Pave = 7.686 W

    Resistance = 2.020 ohm


    Stoney's ECDmeter V1.6 Nantucket

    ---------------------------------

    For more info visit VapeBrain

    Enter ? for optionsā

    Stabilising..


    Linear Vin = 4.006 V

    Pave = 7.663 W

    Resistance = 2.014 ohm


    Help Menu ..

    ---------------

    Jumper RX to TX for flip/enable all

    Jumper TX to GND for mode lock

    Serial display toggles..

    v voltage i current r resistance

    f freq d duty p power

    a renable all

    X/x en/disable data

    ---------------



    Stoney's ECDmeter V1.6 Nantucket

    ---------------------------------

    For more info visit VapeBrain

    Enter ? for optionsā

    Stabilising..


    Linear Vin = 4.018 V

    Pave = 7.782 W

    Resistance = 1.994 ohm


    Linear Vin = 4.018 V

    Pave = 7.686 W

    Resistance = 2.020 ohm


    Linear Vin = 4.006 V

    Pave = 7.663 W

    Resistance = 2.014 ohm


    Linear Vin = 4.006 V

    Pave = 7.663 W

    Resistance = 2.014 ohm


    Linear Vin = 4.018 V

    Pave = 7.686 W

    Resistance = 2.020 ohm


    Help Menu ..

    ---------------

    Jumper RX to TX for flip/enable all

    Jumper TX to GND for mode lock

    Serial display toggles..

    v voltage i current r resistance

    f freq d duty p power

    a renable all

    X/x en/disable data

    ---------------



    Stoney's ECDmeter V1.6 Nantucket

    ---------------------------------

    For more info visit VapeBrain

    Enter ? for optionsā

    Stabilising..


    Linear Vin = 4.006 V

    Pave = 7.759 W

    Resistance = 1.988 ohm


    Linear Vin = 4.006 V

    Pave = 7.663 W

    Resistance = 2.014 ohm


    Linear Vin = 4.018 V

    Pave = 7.686 W

    Resistance = 2.020 ohm


    Linear Vin = 4.018 V

    Pave = 7.686 W

    Resistance = 2.020 ohm


    Stoney's ECDmeter V1.6 Nantucket

    ---------------------------------

    For more info visit VapeBrain

    Enter ? for optionsā

    Stabilising..


    PWM Vpeak = 3.561 V Vave = 3.359 V Vrms = 3.454 V

    Ppeak = 7.157 W Ptrue = 6.752 W

    Resistance = 1.691 ohm

    Duty Cycle = 94.35 % Freq = 90 Hz


    PWM Vpeak = 3.561 V Vave = 3.370 V Vrms = 3.454 V

    Ppeak = 7.157 W Ptrue = 6.774 W

    Resistance = 1.691 ohm

    Duty Cycle = 94.66 % Freq = 81 Hz


    PWM Vpeak = 3.549 V Vave = 3.368 V Vrms = 3.442 V

    Ppeak = 7.133 W Ptrue = 6.770 W

    Resistance = 1.685 ohm

    Duty Cycle = 94.92 % Freq = 81 Hz


    PWM Vpeak = 3.549 V Vave = 3.380 V Vrms = 3.442 V

    Ppeak = 7.133 W Ptrue = 6.794 W

    Resistance = 1.685 ohm

    Duty Cycle = 95.25 % Freq = 81 Hz


    PWM Vpeak = 3.537 V Vave = 3.378 V Vrms = 3.430 V

    Ppeak = 7.109 W Ptrue = 6.789 W

    Resistance = 1.679 ohm

    Duty Cycle = 95.51 % Freq = 80 Hz


    PWM Vpeak = 3.537 V Vave = 3.374 V Vrms = 3.430 V

    Ppeak = 7.020 W Ptrue = 6.697 W

    Resistance = 1.701 ohm

    Duty Cycle = 95.40 % Freq = 81 Hz


    PWM Vpeak = 3.537 V Vave = 3.385 V Vrms = 3.430 V

    Ppeak = 7.020 W Ptrue = 6.719 W

    Resistance = 1.701 ohm

    Duty Cycle = 95.72 % Freq = 81 Hz


    PWM Vpeak = 3.525 V Vave = 3.385 V Vrms = 3.419 V

    Ppeak = 6.997 W Ptrue = 6.719 W

    Resistance = 1.695 ohm

    Duty Cycle = 96.03 % Freq = 81 Hz


    PWM Vpeak = 3.525 V Vave = 3.387 V Vrms = 3.454 V

    Ppeak = 6.997 W Ptrue = 6.724 W

    Resistance = 1.695 ohm

    Duty Cycle = 96.10 % Freq = 80 Hz


    Help Menu ..

    ---------------

    Jumper RX to TX for flip/enable all

    Jumper TX to GND for mode lock

    Serial display toggles..

    v voltage i current r resistance

    f freq d duty p power

    a renable all

    X/x en/disable data

    ---------------

    Log file truncated.

    Tried regulated mods such as ProVari, ZMAX V3, Smoktech Gripper, many mech mods, all different attys etc, was a great learning experience.

    And If I am correct an Ego USB charger charges at 2.5 volts or thereabouts.
    RichoVonBlack and DEATHGUYJ like this.

  2. #2
    AVF Regular
    Join Date
    Dec 2012
    Location
    Off grid, quietly hermity, NW Tas
    Posts
    6,476
    ECD plus serial thingy is fun eh?
    If you work out how to make it log while mobile for download and examine later, please let me know.
    Juzm likes this.


  3. #3
    Senior Member
    Join Date
    May 2013
    Location
    Melbourne
    Posts
    1,721
    Quote Originally Posted by MrGruffy View Post
    ECD plus serial thingy is fun eh?
    If you work out how to make it log while mobile for download and examine later, please let me know.
    I read the whole ECDmeter thread and saw your log posts. Seems like a bit of a difficult task to be honest MrGruffy.

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBulletin® Version 4.2.4
Copyright © 2019 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO 3.6.0
All times are GMT +11. The time now is 10:42 PM.