Page 1 of 2 12 LastLast
Results 1 to 10 of 12
Like Tree16Likes

Thread: Bearbrassmods All Brass Hybrid Interest Thread

  1. #1
    Member
    Join Date
    Feb 2013
    Posts
    30

    Bearbrassmods All Brass Hybrid Interest Thread

    Hello AussieVaper BBM folks!! I have been working on this for some time now and thought it was time to let the rest of the vaping community see it!! This is just as the title states, an interest thread, if I have enough interest I will make them.

    First of all I would like to start off with this:


    Bearbrassmods Hybrid
    Disclaimer

    I am building an all brass hybrid, yes, an all brass hybrid!! The tube, connections, tank and cap will all be brass.

    Since brass can sometimes be a controversial topic in itself, I would like to provide you with some information regarding the research that I have performed on this topic.

    Having been a welder / machinist / fabricator for over 25 years, I have a lot of experiences and preferences surrounding metals.

    First of all brass is only hazardous in its fume state, in order for brass to get to fume state, which is not reached until the metal is heated to 1800 degrees. Lets take a moment to look at our coil set-ups in our atomizers. I have personally tested the direct heat a typical coil reaches (during chain vaping), and experienced temperatures peaking under 400 degrees. This is nowhere near approaching any safety limits of brass, nor is the coil obviously even in direct contact with any brass itself. Even if it were, 400 degrees is a walk in the park for brass.

    Lets also talk a bit about any potential leaching effects of the brass into our e-liquids. With gassing concerns out of the way, the next logical test is to ensure that no harmful chemicals or metals can leach into our e-liquid. To test for safety, I engaged a College Professor in the state of NM. What these tests have produced, boils down to this. A person could start seeing some side effects if that person would be vaping gallons of juice per day, on a daily basis. Symptoms would be flu like.

    With that being said, and as with anything we are putting our bodies, cleanliness should be first and foremost!! The cleaner anything is, the better and less chance of any harmful effects. So cleaning should happen every week or so (no different from any other atomizer). Most of us like tinkering with our mods anyway and while changing flavors, wrapping a new coil, new wick setup, everything should get a good cleaning!!

    I say all of that, to say this… My goal in bringing you this Hybrid is to bring something new and exciting to the market. Being a personal fan of brass (appearance, durability, and performance), I wanted to bring something unique into the marketplace. I have been using prototypes of my Hybrid for months and have gathered feedback from several other avid vapers as well to develop the best possible mod I can. My goal is to deliver sleek style, safety, and performance. I truly believe that you find the pinnacle of those attributes in my new Hybrid and look forward to sharing our combined experiences with it, and that any safety concerns that may exist, quickly subside.


    Thank you for your time!!
    BBM

    Now for some pics and specs!!

    This version AW IMR 18490 batt size
    22mm in dia.
    4.6" in length with out the drip tip
    Approx. 2.5mls in juice capacity
    Stacked air intake holes totaling 1.5mm
    Recessed bottom switch
    Reduced air chamber
    Single wick
    Dual wick, dual coil
    U-wick
    Fill hole
    Juice catch
    Pyrex tank





    shipo, ckane, gtadmin and 3 others like this.

  2. #2
    Senior Member
    Join Date
    Jul 2012
    Location
    Bellbird park Mafia HQ
    Posts
    1,871
    I'm very interested mate does the cap screw on ?

  3. #3
    AVF Regular
    Join Date
    Dec 2012
    Location
    Melbourne Vic
    Posts
    3,151
    I expressed interest on vaporwall and ill do it here to. Hell yes!

  4. #4
    AVF Regular
    Join Date
    Aug 2012
    Location
    In the Hedge fund
    Posts
    3,256
    Make them they will sell

    bugzme x 1
    shipo likes this.

  5. #5
    Senior Member
    Join Date
    May 2011
    Location
    Bescumberville
    Posts
    3,132
    Oh no.........I'm not looking, I'm not I'm not..

  6. #6
    Member
    Join Date
    Feb 2013
    Posts
    30
    Hey BigAli, the cap does not screw on. It does hold in place very well though!!
    bigalivapor likes this.

  7. #7
    AussieVapers approved Vendor
    Join Date
    Aug 2012
    Location
    VIC, Australia
    Posts
    792
    Hey mate you seem like the kinda guy that wants to strive for the best and I like that.

    If the price is right for these I will definitely reconsider ordering the ngp.

    Sent from my Nexus 7 using Tapatalk 2
    Current set up:
    EHPro Panzer and Kayfun Lite Plus V2 Clone.

  8. #8
    AV Approved Manafacturer/Modder
    Join Date
    May 2011
    Location
    Las Vegas
    Posts
    463
    Romaniac X2 units

    WWW.JAZZEPIPE.COM

  9. #9
    AVF Regular
    Join Date
    Nov 2012
    Location
    NT
    Posts
    3,687
    I like the fact he uses gats as mod holders, if I get the chance I'll do the same with a F88 Styr,
    kingsr and MrGruffy like this.
    Vaporista
    Noob for life


    Last Analog


    12-12-12 at Midnight

    "If it was easy, all the cool kids would be doing it",

  10. #10
    Member
    Join Date
    Feb 2013
    Posts
    30
    I will be making some changes to this hybrid. I should have more information for you folks by this weekend!! Stay tuned!!

    BBM
    bevoh likes this.

 

 
Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBulletin® Version 4.2.4
Copyright © 2019 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO 3.6.0
All times are GMT +11. The time now is 04:28 PM.