Page 1 of 6 123 ... LastLast
Results 1 to 10 of 52
Like Tree70Likes

Thread: Smok Natural DID Hybrid & Upgrade

  1. #1
    AVF Regular
    Join Date
    Aug 2012
    Location
    Gympie Queensland
    Posts
    2,404

    Smok Natural DID Hybrid & Upgrade

    Was hoping the Natural would be compatible with the AGA-T threads, but sadly no, also the switch and battery pin were not brass or very well designed IMHO, so here is what I've done to mine.

    1. Voltage test fresh 18650



    Under Load 1.1Ohm Coil



    2. Some offending Parts

    Mickg33, shipo, Mushman and 1 others like this.
    Vaping since July 2012.

  2. #2
    AVF Regular
    Join Date
    Aug 2012
    Location
    Gympie Queensland
    Posts
    2,404
    More offending Parts




    3.Abusing and slashing before and after (pillar drill and disc grinder used)




    4. Sanding and Polishing done

    shipo, Mushman, kptrip and 1 others like this.
    Vaping since July 2012.

  3. #3
    AVF Regular
    Join Date
    Aug 2012
    Location
    Gympie Queensland
    Posts
    2,404
    5. DID center pin extended and packed out.



    6. Some beautiful pins cut sized and polished.



    shipo, ckane, Mushman and 5 others like this.
    Vaping since July 2012.

  4. #4
    AVF Regular
    Join Date
    Aug 2012
    Location
    Gympie Queensland
    Posts
    2,404
    7. All back together and tested under load, now up to 3.7v on 1.1Ohm coil.



    8. 18650 Size comparison with ZMAX & Poldiac in 18650 mode ( also AGA-T/Paps Hybrid in 18350 mode )



    18500 Size comparison with ZMAX & Poldiac in 18500 mode ( also AGA-T/Paps Hybrid in 18350 mode )

    floorzone2, shipo, Mushman and 2 others like this.
    Vaping since July 2012.

  5. #5
    AVF Regular
    Join Date
    Aug 2012
    Location
    Gympie Queensland
    Posts
    2,404
    I haven't modded the switch pin yet, but plan to do so, this will shorten the throw giving and easier/softer button push & hopefully another improvement in voltage under load, just wanted to share this before I crash out
    Last edited by studiovape; 14-02-13 at 02:18 AM.
    Noe, Mushman, Robray and 2 others like this.
    Vaping since July 2012.

  6. #6
    AVF Regular
    Join Date
    Aug 2012
    Location
    Gympie Queensland
    Posts
    2,404



    By the way, 18650 Panny & 18350 Aw use the same longer pin, and the AW 18500 uses the shorter one.
    Vaping since July 2012.

  7. #7
    AVF Regular
    Join Date
    Sep 2011
    Location
    Grumpy Old man, Living inPerth Northern suburbs
    Posts
    6,590
    Hey SV

    I see you have a grey 18650 battery there?? I have a few of those rescued from a battery pack. Any chance you know the manufacturer?? They are not bad cells and wouldn't mind latching onto a couple more.
    Because I trust no-one Who tells me FACTS with no proof

  8. #8
    AVF Regular
    Join Date
    Aug 2012
    Location
    Gympie Queensland
    Posts
    2,404
    Quote Originally Posted by Robray View Post
    Hey SV

    I see you have a grey 18650 battery there?? I have a few of those rescued from a battery pack. Any chance you know the manufacturer?? They are not bad cells and wouldn't mind latching onto a couple more.
    Grey 18650s are Panasonic CGR IMR, Supersport600 has them on his ebay site
    Robray likes this.
    Vaping since July 2012.

  9. #9
    AVF Regular
    Join Date
    Sep 2011
    Location
    Grumpy Old man, Living inPerth Northern suburbs
    Posts
    6,590
    Thanks so much for that.
    studiovape likes this.
    Because I trust no-one Who tells me FACTS with no proof

  10. #10
    AVF Regular
    Join Date
    Aug 2012
    Location
    Gympie Queensland
    Posts
    2,404
    Quote Originally Posted by studiovape View Post
    I haven't modded the switch pin yet, but plan to do so, this will shorten the throw giving and easier/softer button push & hopefully another improvement in voltage under load, just wanted to share this before I crash out
    One word of warning. If you do this mod, do not unscrew the atomizer while the battery is in place, if you invert the mod the battery can short itself out inside the tube.
    Mushman, kptrip, Robray and 2 others like this.
    Vaping since July 2012.

 

 
Page 1 of 6 123 ... LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBulletin® Version 4.2.4
Copyright © 2019 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO 3.6.0
All times are GMT +11. The time now is 06:06 AM.