Page 1 of 3 123 LastLast
Results 1 to 10 of 28
Like Tree15Likes

Thread: Phoenix RBA

  1. #1
    Senior Member
    Join Date
    May 2010
    Location
    Clagiraba, Queensland
    Posts
    10,965

    Phoenix RBA

    been vaping on a budget so heres a cheap option.

    I hear its risky buying from vaporbreak but that has not been my experience.
    perhaps just buy one or two of these though..
    http://www.vaporbreak.com/en/161-pho...-atomzier.html

    I have used virtually nothing else since getting my 2, the original heater is pretty good but they really come alive with 7 or 8 turns tightly wrapped on a 2.5mm wick, incredible flavour, I pick up nuances of multiple flavours that I can't taste AT ALL in a carto tank. Outperforms a 306 dripping atty for me .. easily.

    speaking of dripping .. grab some if these little bottles too..
    http://www.vaporbreak.com/en/136-10-...l-bottle-.html

    leak free unless the top silicon cap comes off.
    it has happened in pocket but did not leak anyway .. i love these bottles.

    back to the atty ..

    few issues, bit of a fiddly job to mount a new wick, use a magnifying headset if an old prick like me. mount heater diagonally across the atty .. much better.

    another hassle, best to remove drip tip when dripping, it can run liquid down between the outer and inner shells, pretty much stays there till you unscrew.

    the pin on the bottom starts to push up easily after a while, push down on the higher atty pin on the raised section to push back down.
    yet to get one in pieces, i think the top of the inner section is push fit ring.

    so some hassle but for $5.50. hell, who cares and its a good device generally.

    on the basis of how much i like these, i have now bought a couple of A7's from mountain oak vapors. will report later..
    gtadmin, DAWZZY, Fatman and 1 others like this.
    In order of useful: Provari V2 and V1, vamo, eGo twist, Katana v3, Hex, Orion v2, LavaTube, eGo x 6, VMAX, 510N, Tick V2, Tick V1, noEgo 18650, noEgo 14650 , Indulgence x 2, 905 6v mod, KR808D



  2. #2
    Super Moderator
    Join Date
    Aug 2012
    Location
    Central Vic,up near the Murray
    Posts
    17,897
    Yep I like my little Pheonix's too , and like you Stoney I havent had an issue yet with Vaporbreak ( 6 orders so far , no probs , juice a bit iffy , but you get what you pay for)
    EPM V2-18490 (X2 ),GP Spheroid V2.5 and GP Piccolo V2.5 ,BBCB, Provari mini's, REO mini V2.1, 18490 REO , Jazz Carto Pipes ( fitted with GA tank and churchwarden stem Totally Evil!!! ), Meerschaum pipe ,e-holly35W,Phideas, AIOS,Taifun atties, PC Pipe mods.PC Squonker, Svapiamo squonker, GP Paps Heron combo.

    Vaping since 2007 totally smoke free since 2011


    AVF Rules , Read and understand them

  3. #3
    AVF Regular
    Join Date
    Oct 2011
    Location
    livin next door ta Allen
    Posts
    596
    yeah Im happy with with my phoneixs from vaporbreak but wont buy from them again thankgod for paypal recovering my funds on my last order from them but I still lost out on 2 orders that arrived with half items missing , you guys have been lucky but i belive its only a matter of time b4 you get burnt
    xALISAx likes this.
    Smokin no good A .




  4. #4
    Super Moderator
    Join Date
    Jan 2012
    Location
    Whyalla, SA
    Posts
    13,095
    These are the same as the VM Bulls from VapingMad yes?

    They are great little atties, and have been using them exclusively for about 4-6 weeks, I have 3 from Elise and am waiting on another 3 from vaporbreak (as well as another little rebuildable and some pre-coiled wicks). A "helping hand" with magnifying glass and a good light source really helps me to recoil these too.

    Edit: I drilled out the airhole to 1.2mm on my first one, get more vapour and a slightly airier draw
    Last edited by gtadmin; 01-01-13 at 02:45 PM.

  5. #5
    AVF Regular
    Join Date
    Oct 2011
    Location
    livin next door ta Allen
    Posts
    596
    Quote Originally Posted by gtadmin View Post
    These are the same as the VM Bulls from VapingMad yes?
    this is a pita vendors renaming as there own
    virtualphoenix likes this.
    Smokin no good A .




  6. #6
    Senior Member
    Join Date
    Feb 2012
    Location
    Rydalmere
    Posts
    932
    Ordered 5 of these on December 5 still waiting for them. Tracking says still in China, 2 emails sent no reply yet, but i have used them before.
    But i agree with lastchance i don't know why some venders even ones overseas rename the exact same thing, it does cause more confusion.


    Just got them in the mail. tracking still says in china though

    Phoenix on a sidewinder
    Last edited by virtualphoenix; 02-01-13 at 01:14 PM. Reason: received
    Don't try to be a great man; just be a man

  7. #7
    Super Moderator
    Join Date
    Jan 2012
    Location
    Whyalla, SA
    Posts
    13,095
    And mine have just turned up today as well. The VM Bull and these have slight differences in design but the atty / battery connector part is identical.

  8. #8
    AVF Regular
    Join Date
    Jun 2012
    Location
    Gold Coast Qld
    Posts
    3,838
    They sound very good value..worth the uncertain.wait i guess...im impressed how small that sidewinder is..if i had known i wuda joined that list

  9. #9
    Super Moderator
    Join Date
    Jan 2012
    Location
    Whyalla, SA
    Posts
    13,095
    Quote Originally Posted by Stomp View Post
    They sound very good value..worth the uncertain.wait i guess...im impressed how small that sidewinder is..if i had known i wuda joined that list
    If you don't want the uncertainty of dealing with Vaporbreak, you can get them from Elise. You also get 3x extra pre-coiled wicks and a handy metal case if you go that way. A 650mAh eGo with one of these atty's is only 5mm longer than the sidewinder as shown and definitely smaller in diameter so I couldn't see any advantage in buying one?

    Either way, these are very good value dripping atty.

  10. #10
    AVF Regular
    Join Date
    Jun 2012
    Location
    Gold Coast Qld
    Posts
    3,838
    Quote Originally Posted by gtadmin View Post
    If you don't want the uncertainty of dealing with Vaporbreak, you can get them from Elise. You also get 3x extra pre-coiled wicks and a handy metal case if you go that way. A 650mAh eGo with one of these atty's is only 5mm longer than the sidewinder as shown and definitely smaller in diameter so I couldn't see any advantage in buying one?

    Either way, these are very good value dripping atty.
    Yeah ok.she has a good selection now...an i like the pre made wick idea..always struggle a bit making them an end up chucking everything back in the drawer...been using the little igloo lately an has been great..threads a bit dicky but still fires fine...

 

 
Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBulletin® Version 4.2.4
Copyright © 2019 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO 3.6.0
All times are GMT +11. The time now is 11:57 AM.