Page 1 of 5 123 ... LastLast
Results 1 to 10 of 42
Like Tree22Likes

Thread: [FS][VIC] Various DID atomisers

  1. #1
    Senior Member
    Join Date
    Mar 2012
    Posts
    1,570

    [FS][VIC] Various DID atomisers

    Hi folks,

    This is the last of my genesis gear - it’s been some months since I used it so it’s time for the cycle of life to begin again...

    They are all real DID atties from MM Vapours - all parts should you need them are readily available from the manufacturer and postage is only 7 Euros. All in excellent condition and stock except some of the satin used to be shiny and I hand polished both deck and inner tank faces.

    Probably don’t buy these unless you are a gen-head (try an AGA or similar first), but having said that, I am selling at about 2/3 of current replacement cost and they are top shelf quality IMO, so it’s hard to see there would be much further depreciation if you find you’re a rope-head after all.

    Thanks for reading.


    Standard House of Cabbage Terms and Conditions:
    Price includes express postage in Oz. I am not prepared to split hairs, items or infinitives - atoms yes (BYO asbestos shorts). I will not trade unless we have exchanged vowels. I do not discount (moderators/site owner get a ‘thanks for putting up with us all and providing a market place’ discount of 10% to the nearest multiple of 8 clams). The buyer may rest assured that an animal *has* been used in testing these products and I give you my solemn promise that 100% of the proceeds will go towards the further undermining of the illegitimate revenue of Big Tobacco, Big Pharma, Big Gummint and Big Tosser (that Simon chap, man is he a nitrogen thief!)

    Standard DID: (Dropped to $80) (replacement cost about $140)
    - 1 x Standard size in satin - this was an early pre logo model, upgraded to stainless steel bolts and nuts.
    - 4 x Spare tank outer o-rings
    - 2 x Inner tank o-rings
    - 1 x spare insulator
    - 1 x brass top nut
    - 1 x my rough as guts but works copy of a Studiovape adjustable breather screw
    - 1 x IB Tanked pyrex tank & protective housing
    - 1 x stainless steel tank
    - 1 x MM delrin drip tip

    std_pack.jpg

    std_prov.jpg
    Last edited by mathsguy; 13-05-13 at 08:11 PM.
    RichoVonBlack and 308hjute like this.

  2. #2
    Senior Member
    Join Date
    Mar 2012
    Posts
    1,570
    SOLD and posted to Mickg33

    Shiny Min
    i: (Dropped to) $72 (replacement cost about $130)
    - 1 x mini size in shiny # 302
    - 2 x Inner tank o-rings
    - 1 x spare insulator
    - 1 x spring and washer +ve post connection option
    - 1 x stainless steel tank
    - 1 x MM delrin drip tip

    shiny_ego.jpgshiny_pack.jpgshiny_prov.jpg
    Last edited by mathsguy; 15-05-13 at 03:16 PM.
    RichoVonBlack likes this.

  3. #3
    Senior Member
    Join Date
    Mar 2012
    Posts
    1,570
    SOLD and posted to second_chance

    Satin Min
    i: $88 (replacement cost about $140)
    - 1 x mini size in satin # 222
    - 1 x spare insulator
    - 1 x Kir Franis clear plastic tank
    - 1 x stainless steel tank
    - 1 x spring and washer +ve post connection option
    - 1 x MM delrin drip tip

    sat_ego.jpgsat_pack.jpgsat_prov.jpg
    Last edited by mathsguy; 13-05-13 at 04:28 PM.
    RichoVonBlack likes this.

  4. #4
    Senior Member
    Join Date
    Mar 2012
    Posts
    1,570
    SOLD and posted to Bobsmith2012

    Gemeni -
    (Dropped to) $132 (replacement cost about $220)
    - 1 x mini top size in satin # 472
    - 1 x standard top size in satin # 201
    - 1 x stainless steel standard size tank
    - 1 x stainless steel gemeni tank
    - 1 x IB Tanked pyrex standard sized tank & protective housing
    - 1 x all hardware required to make either standard or gemeni atty (all you would need is the base to also make a mini)
    - 1 x MM delrin drip tips
    - 2 x Inner tank o-rings
    - 1 x spare insulator
    - 1 x spring and washer +ve post connection option
    - 1 x brass top nut
    - 4 x Spare outer tank o-rings

    gem_pack.jpggem_pipe.jpggem_prov.jpg
    Last edited by mathsguy; 15-05-13 at 03:59 PM.

  5. #5
    AVF Regular
    Join Date
    Mar 2011
    Location
    Sydney
    Posts
    5,466
    I have owned all of the above DIDs at one point or another and they all work really well.

    Couple of other things that makes these very useful to have in your vape kit that some people may not know.

    1. Mini did is 14 mm, so it fits on the svoe stickers really well, whereas 16mm dont fit with a 16mm 14500. They also have a 2.8mm wick hole so 7/64 ceramic wicks will fit in them
    2. Standard DID has 3.5mm wick holes so is perfect for 1/8 ceramic wicks.

    Unlike many of the chinese clones these are solid SS, so you dont need to worry about copper poisoning if the plating wears out

    I think from memory they have 1.2mm air holes sizes, which for me is the perfect size.
    Last edited by Mickg33; 11-05-13 at 07:27 PM.
    I have 50% Originals and 50% clones, am too lazy to try to change the world and bored with the whole debate

  6. #6
    Senior Member
    Join Date
    Mar 2012
    Posts
    1,570
    Cheers Mick - I have been following what you guys have been up to with ceramic and it all seems very promising.

  7. #7
    AVF Regular
    Join Date
    Dec 2012
    Location
    Off grid, quietly hermity, NW Tas
    Posts
    6,476
    Damn fine FS Mathsguy, set a new standard for this.
    Good stuff, good price, hope it goes to a good home.
    mathsguy likes this.


  8. #8
    Senior Member
    Join Date
    Mar 2012
    Posts
    1,570
    Thanks Mr G, me too. They’ve spent long enough in this den of iniquity.

  9. #9
    Senior Member
    Join Date
    Mar 2013
    Location
    Queensland
    Posts
    1,160
    Mate I will grab the mini if that is OK?

  10. #10
    Senior Member
    Join Date
    Mar 2012
    Posts
    1,570
    No worries mate - shiny or satin one? (Satin one come with the KF tank)

 

 
Page 1 of 5 123 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBulletin® Version 4.2.4
Copyright © 2020 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO 3.6.0
All times are GMT +11. The time now is 07:46 PM.