Results 1 to 3 of 3
Like Tree3Likes
  • 3 Post By hank

Thread: Innokin itaste vv4 1000mah vw battery as new with box and usv cable $30

  1. #1
    Junior Member
    Join Date
    Mar 2013

    Innokin itaste vv4 1000mah vw battery as new with box and usv cable $30

    Innokin iTaste VV4-M 1000mAh Variable Power Battery

    in excellent condition with original box, manual and usb cable. works perfectly. no damage to screen or battery. colour black

    Looking for a compact, Variable Power, Ego type battery with a built in Passthrough Feature?

    Based on the bestselling Innokin iTaste VV v3.0 comes the iTaste VV4 featuring a wider range of Variable Voltage and Variable Wattage, advanced safety features, and the famous “Vape While You Charge” technology. Variable voltage on the iTaste VV v4.0 is adjustable in 0.1 increments from 3.0V to 6.0V. The watts on this awesome battery are adjustable from 6.0 to 15.0 in 0.5 increments.

    The high quality OLED screen looks great and clearly displays the resistance of the attached tank & coil, voltage, wattage and also accurately shows the remaining battery charge. The iTaste VV4 is an affordable, reliable, and ultimately satisfying daily vape device.


    Dimension: 5-1/8"L x 5/8"W
    510 and eGo Threaded
    Operating Voltage: 3.0V-6.0V
    Charging Time: 1.5 Hours
    Operating Voltage: 3.3V-5.0V
    Operating Wattage: 6.0W-15.0W
    Minimum Resistance: 0.8 ohms

    Inclusions *:

    1 x 1000mAh Innokin iTaste VV4 VW Battery
    1 x USB Charging Cable

    The Primary Features of The iTaste VV4


    The iTaste VV4 is charged through a Micro USB Port. You can recharge it with any standard MicroUSB cable. It can also work as a pass-through device for simultaneous vaping and charging. The battery must contain a small charge before it can be used in this way. If you're using the battery quicker than it can charge, the battery will shutoff. We suggest charging the battery for 10-15 minutes before using it.

    Battery Level Indicator:
    The iTaste VV4 battery capacity is displayed via green, yellow and red LED lights.
    Green = Almost fully Charged. When the iTaste VV4 is fully recharged the LED light will power off.
    Yellow = Half Power.
    Red = Low Power. Charge the VV4.

    Variable Voltage:
    Voltage can be adjusted from 3.0 – 6.0 volts in .1 volt increments.

    Variable Wattage:
    Wattage can be adjusted from 6.0 – 15.0 Watts in .5 watts increments.

    Large battery capacity:
    The iTaste VV4 has a built-in mAh polymer Li-Ion rechargeable battery.

    ON/OFF battery switch:
    Press the power button three times in rapid succession to turn on the iTaste VV4. Once the iTaste VV4 is On hold down the power button to activate the atomizer and vape. When the iTaste VV4 is not in use, press the power button three times in succession to power off the iTaste VV4 Advanced Personal Vaporizer. Always power off the iTaste VV4 Advanced Personal Vaporizer when it is not being used, or when it is going to be stored in a pocket, bag or purse.

    10 second cutoff:
    If the activation button is held for 10 seconds or longer the iTaste VV4 Advanced Personal Vaporizer will stop firing until the button is released and pressed again.

    Low Voltage Warning:
    The Red LED and Battery bar will continue blinking when the battery capacity is lower than 3.3V and the iTaste VV4 Advanced Personal Vaporizer will power off automatically.

    Short Circuit/Atomizer Protection:
    Short Circuit/Atomizer Protection protects the iTaste VV4 Advanced Personal Vaporizer against shorted atomizers and will stop the unit from functioning in unsafe conditions.

    The iTaste VV4 features automatic real-time atomizer Ohms detection. If the resistance of the atomizer is lower than 0.8 the Ohms bar will blink.
    If there is a short circuit the VV4 screen will display the following and the LED light will power off.

    Over-Discharge Protection:
    The iTaste VV4 Advanced Personal Vaporizer monitors the battery voltage and will automatically power off when the battery is discharged.

    Settings Retention:
    The device remembers the last voltage or wattage used when switching batteries.

    Display Information:
    The bright display shows resistance (ohms), voltage, wattage, atomizer voltage output, puff count, and last-used settings.
    Last edited by dlakers3peat; 10-10-16 at 09:56 PM.

  2. #2
    AVF Regular
    Join Date
    Aug 2013
    Awesome first post. Credit for being registered since 2013
    Tom Drake, steve.c and juzdin like this.
    Not in need of peoples issues

  3. #3
    AVF Regular
    Join Date
    Aug 2013
    Edit: Deleted.
    Stupid (late night!) post from me
    Last edited by Tom Drake; 13-10-16 at 12:38 AM. Reason: Better



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Powered by vBulletin® Version 4.2.4
Copyright © 2020 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO 3.6.0
All times are GMT +11. The time now is 08:54 AM.