Page 1 of 2 12 LastLast
Results 1 to 10 of 17
Like Tree10Likes

Thread: Looking for goon bf pin

  1. #1
    AVF Regular
    Join Date
    Oct 2016
    Location
    Sydney
    Posts
    210

    Looking for goon bf pin

    Hello AVF,

    i am looking for goon 24mm/22mm squonk pin.
    Googled it and found few vendors selling it outside Australia, Shipping will be more than cost of bf pin and will take ages to arrive.
    Can someone suggest where to find it in Australia or best possible buy.

    Thank you.

    Sent from my SM-G935F using Tapatalk

  2. #2
    AVF Regular
    Join Date
    Nov 2016
    Location
    Brisbane
    Posts
    234
    Unless someone is willing to sell you theirs I think you are going to have to look overseas. Signature Tips in the UK has them for 10 pound (I think?).. 528 Customs has them for 10USD.. but I recently bought another Goon a few days ago from 3fVape and also another squonk pin for 0.99USD. The first two options would be reliable in actually working as I have a Sig Tips squonk pin and it's fine... and I doubt the actual manufacturer of the Goon (528 Customs) would make a dodgy one. The only problem is shipping is expensive from those two. The 3fvape one is cheap, and has cheap shipping.. or 27USD DHL 3-7 day express if you want it, I just can't comment on the quality of that pin yet. Good luck.
    VapeLikeKing505 likes this.

  3. #3
    AVF Regular
    Join Date
    Mar 2016
    Location
    Melbourne
    Posts
    2,901


    Where all think alike, no one thinks very much.

  4. #4
    AVF Regular
    Join Date
    Mar 2014
    Location
    Melbourne
    Posts
    945
    or - depending on the size of the pin - one of the FDV ones could fit ?

    RDA Squonk Conversion M3 Screw (Pack of 3) or 2.5 mm . . .

    I might have a spare one - if you let me know the size ?
    VapeLikeKing505 likes this.

  5. #5
    AVF Regular
    Join Date
    Oct 2016
    Location
    Sydney
    Posts
    210
    Quote Originally Posted by 1ynne View Post
    So strange.. searched fastech earlier and couldn't find.. hehe
    Thank you 1ynne.. you are the best

    Sent from my SM-G935F using Tapatalk

  6. #6
    AVF Regular
    Join Date
    Oct 2016
    Location
    Sydney
    Posts
    210
    Quote Originally Posted by MelbVFR View Post
    or - depending on the size of the pin - one of the FDV ones could fit ?

    RDA Squonk Conversion M3 Screw (Pack of 3) or 2.5 mm . . .

    I might have a spare one - if you let me know the size ?
    Honestly i dont know how to check the size of the pin.. all i read about it online which says its m2.5 i think the height is 6mm. But i am not sure how to confirm that.. dont have tools to check on goon original 510pin.

    I will ordered it from fastech and see how it goes.
    Thanks for the help
    Cheers

    Sent from my SM-G935F using Tapatalk

  7. #7
    AVF Regular
    Join Date
    Dec 2016
    Location
    Brisvegas
    Posts
    119
    Quote Originally Posted by 1ynne View Post
    Lynne I could kiss you right now. I did a search on FT for them but theyre not listed as BF or Squonk so nothing came up. Was about to place order from 528 but this just made it a $4 purchase. Thankyou XD
    VapeLikeKing505 likes this.

  8. #8
    AVF Regular
    Join Date
    Apr 2013
    Location
    Toowoomba (West)
    Posts
    7,897
    Anyone got an idea on a similar BF pin for the NarDA? I've searched Fasttech unsuccessfully (but then their search engine is really bad).
    They are M2.5x6mm

    It's not critical right now but I want the spare part so I can put the NarDA on a Squonker when I get it. (might just be a Pico Squeeze to start with).
    gtadmin and VapeLikeKing505 like this.
    Chris: Tobacco free since 17:00 15th March 2013.

  9. #9
    AVF Regular
    Join Date
    Oct 2016
    Location
    Sydney
    Posts
    210
    Hi Fab,

    I think this is the same size as goon..
    I am not sure but thats the size i saw on some websites for goon. I am not expert though at this.. i am buying it for the first time.
    I saw some clones for Narda on FT which comes with bf pin may be that fits?

    Sent from my SM-G935F using Tapatalk

  10. #10
    Super Moderator
    Join Date
    Jan 2012
    Location
    Whyalla, SA
    Posts
    13,095
    Quote Originally Posted by fabricator4 View Post
    Anyone got an idea on a similar BF pin for the NarDA? I've searched Fasttech unsuccessfully (but then their search engine is really bad).
    They are M2.5x6mm

    It's not critical right now but I want the spare part so I can put the NarDA on a Squonker when I get it. (might just be a Pico Squeeze to start with).
    I reckon I bought these and drilled them
    Ignore the Super-moderator tag in my profile, I have resigned from that position but admin have not updated my profile as yet

 

 
Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBulletin® Version 4.2.4
Copyright © 2019 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO 3.6.0
All times are GMT +11. The time now is 01:12 AM.