Page 81 of 82 FirstFirst ... 317179808182 LastLast
Results 801 to 810 of 815
Like Tree107Likes

Thread: 3FVape: Deals, Discounts, Cupons updated

  1. #801
    AVF Regular
    Join Date
    Dec 2014
    Posts
    670
    Original GAS Mods Nixon V1.5 RDTA Rebuildable Dripping Tank Atomizer with BF Pin $20.99
    The Original GAS Mods Nixon V1.5 RDTA is a mini size RDTA and features invisible airslots. The airslots will appear once you rotate the top cap clockwise and the airflow can be adjusted in this way. The deck features dual post for single coil build. The refilling holes are near the post with very small size, but the RDTA also support squonking. The tank comes with 510 POM drip tip.This item also has many color to choose.
    The RDTA comes with bottom feeder pin. Series number is on the bottom (wiped, not shown on the image).

    Original Simeiyue SMY X9 900mAh All-in-One Starter Kit $10.99
    The Original Simeiyue SMY X9 all-in-one starter kit is a mini kit with 900mAh battery and 14mm diameter atomizer. The battery works with output voltage at 3.3~4.2V, and the charging time is about 2~3 hours. The battery can be charged for 800 times. The atomizer features e-juice capacity of 2ml and 2.4 ohm atomizer resistance. It is very convenient to carry and use for all vapers.

    Vape Breed Hybrid Mechanical Box Mod Clone + Atty V4 RDA Clone Kit with Extended Tube $23.99
    The mod kit consists of Vape Breed Mechanical Box Mod Clone and Vape Breed Atty V4 RDA Clone.This item also has many color to choose.
    Mod:
    The Vape Breed Mechanical Box Mod Clone is constructed from POM (shell) and brass (mod). It is hybrid without 510 center pin. There are two venting slots on one side for battery safe and big fire button on the opposite side. The battery access door can be easily removed by hand. The mod is powered by 1 x 18650 battery (not included).
    The series number is on top side (wiped, not shown on the image.)
    RDA:
    The Vape Breed Atty V4 RDA Clone is constructed from brass (middle cap) and stainless steel (top cap, base) in 24mm diameter. The top cap is beveled to fit the drip tip. It features side adjustable airflow and bottom direct airflow. The two post build deck features stair style posts with four holes. Each post has two slot screws on top. It is easy to build both single and dual coils. The 510 protruding pin makes it compatible with hybrid mods. The RDA comes with removable wide bore drip tip.
    The series number is on the bottom (wiped, not shown on the image.)

    Original Sigelei Fuchai Vcigo K2-T 230W TC VW Variable Wattage Mod + T3 Tank Kit $49.99
    The mod kit consists of Sigelei Fuchai Vcigo K2-T box mod and T3 sub ohm tank atomizer.This item also has many color to choose.
    Mod:
    The Sigelei Fuchai Vcigo K2-T box mod is a sleek designed mod with 0.96 inch TFT color screen and powerful but stable performance. Powered by 2 x 18650 batteries (not included), the mod can configure output power from 10 to 230W. The temperature control mode supports Kanthal / SS (304 / 316 / 317) / Titanium / Ni200 / TCR and the resistance range is from 0.05 to 3 ohm.
    Tank:
    The Sigelei Fuchai T3 sub ohm tank is a 24mm diameter atomizer with maximum juice capacity of 2.8ml. It features convenient top fill design and bottom adjustable airflow. It adopts 0.2 ohm coil to provide big clouds.

    810 Replacement Wide Bore Drip Tip Kit for TFV8 / TFV12 / Goon / Kennedy - Random Color, Resin, 16mm (5 PCS) $7.99
    The 810 drip tip is made from resin in 16mm height. It is suitable for TFV8 Tank, TFV8 Big Baby Tank, TFV12 Tank, Goon RDA, Goon RTA, Lost Art Goon RDA, Goon LP RDA, Kennedy 24 / 25 RDA, Battle RDA, Kryten RDA, Mad Dog RDA, Mask RDA, CSMNT Cosmonaut RDA, Unholy RDA, Apocalypse GEN 2 RDA, Reload RDA, Mini Battle RDA, Avid Lyfe Captain Cap II, Sith RDA.
    This drip tip will be shipped in random color (5 PCS). More options than what's on the image.

    810 Replacement Wide Bore Drip Tip Kit for TFV8 / TFV12 / Goon / Kennedy - Random Color, Resin, 16mm, 13mm (4 PCS) $6.99
    The 810 drip tip is made from resin in 16mm height. It is suitable for TFV8 Tank, TFV8 Big Baby Tank, TFV12 Tank, Goon RDA, Goon RTA, Lost Art Goon RDA, Goon LP RDA, Kennedy 24 / 25 RDA, Battle RDA, Kryten RDA, Mad Dog RDA, Mask RDA, CSMNT Cosmonaut RDA, Unholy RDA, Apocalypse GEN 2 RDA, Reload RDA, Mini Battle RDA, Avid Lyfe Captain Cap II, Sith RDA.
    This drip tip will be shipped in random color (4 PCS). More options than what's on the image.

    Original 528 Custom Replacement Top Cap Sleeve for Goon 1.5 RDA $11.99
    The Original 528 Custom replacement top cap sleeve is made from aluminum and is suitable for 528 Custom Goon 1.5 RDA atomizers.This item also has many color to choose.
    3FVape - Ultimate Mechanical Mod & Atomizer Store- Free Shipping

  2. #802
    AVF Regular
    Join Date
    Dec 2014
    Posts
    670
    Original Smokjoy Kaiser RTA Rebuildable Tank Atomizer $26.99
    The Original Smokjoy Kaiser RTA is constructed from stainless steel in 24mm diameter. It has convenient top fill design and 3ml e-liquid capacity. The deck is floating with stair style dual posts, which provide much space for easy coil build. The Kaiser has both top and bottom airflow design and comes with wide bore ultem drip tip.This item also has many color to choose.

    Original Smokjoy Mushroom Cloud RDA Rebuildable Dripping Atomizer $20.99
    The Original Smokjoy Mushroom Cloud RDA is a sleek designed dripper with 24mm diameter. The deck is dual post style for easy coil build. It features incredible turbine airflow for big cloud production. With the side adjustable airslots and 45 degree angled inlets, the MC RDA will definitely bring different vaping experience.This item also has many color to choose.

    Reload RTA Rebuildable Tank Atomizer Clone with Bubble Tank $10.99
    The Reload RTA Clone is constructed from stainless steel in 24mm base diameter with about 5ml capacity (with bubble tank). It features post-less deck design for single or dual coil build and gold plated 510 positive pin. Comes with bottom side adjustable air slots for airflow control, you can enjoy better flavor and cloud. The RDA comes with a wide bore ULTEM 810 drip tip.This item also has many color to choose.

    Kayfun Lite Plus Five Pawns RTA Clone Rebuildable Tank Atomizer $9.99
    The Kayfun Lite Plus Five Pawns RTA Clone is constructed from 316 stainless steel with PC tank. It is 22mm in diameter and comes with 2.5ml capacity. With the special "Pawn" style drip tip, you can enjoy more denser flavor as well as a high volume of vapor.

    Rapture RDA Clone Rebuildable Dripping Atomizer $7.99
    The Rapture RDA Clone is constructed from aluminum (cap) and stainless steel (base) in 24mm diameter. The RDA's mounting tray includes dual clamp posts forming a bridge over the shelf for extra space. Very easy to handle, you will have no trouble making large or small coils. The juice well is deep enough for cotton and e-juice. The RDA comes with side adjustable airflow and bottom airflow and goon style wide bore drip tip.This item also has many color to choose.

    YFTK Kayfun 5S RTA Rebuildable Tank Atomizer Clone Original Price $17.99,Now Only $14.99
    The YFTK Kayfun 5S RTA Clone is constructed from 316 stainless steel in 25mm diameter. It features convenient top fill design, e-juice flow control, shorter chimney for better flavor, as well as an easy-to-build deck for single coil. The Kayfun 5S will bring you different vaping experience.

    Orage RDA Rebuildable Dripping Atomizer with BF Pin $9.99
    The Orage RDA Clone is constructed from stainless steel in 24mm diameter. It features dual post build deck with top slotted screws for both single and dual coil building. The RDA comes with bottom adjustable airflow with four airslots and dual triple-hole air channels in the deck. PEI wide bore drip tip is included for the RDA.
    This RDA comes with bottom feeder pin.

    VGME Bottom Feeder Squonk Mechanical Box Mod + BF RDA Kit $55.99
    The mod kit consists of VGME squonk box mod Clone and VGME BF RDA Clone.This item also has many color to choose.
    Mod:
    The VGME Mechanical Mod Clone is a squonk mod with 8ml capacity bottom feeder silicone bottle. The box mod is made from stabilized wood with colorful and beautiful wood grain pattern. It is powered by 1 x 18650 battery (not included). The squonk mod is mini size and feels nice in palms, very travel friendly and convenient.
    RDA:
    The VGME Style BF RDA is made from stabilized wood (cap, drip tip) with colorful and beautiful wood grain pattern, and stainless steel (base). It features 24mm diameter, side adjustable airflow and squonk-friendly pin.

    VGOD Pro Mech Hybrid Mechanical Mod Clone + VGOD TrickTank Pro RDTA Clone Kit $14.99
    The mod kit consists of VGOD Pro Mech Hybrid Mechanical Mod Clone and VGOD TrickTank Pro RDTA Clone.This item also has many color to choose.
    Mod:
    With stainless steel construction and aerospace grade carbon fiber encrusted button (spring type), the Pro Mech feels good in hands.The mod is 24mm in diameter, and features self-adjusting copper battery contact. It has engraved VGOD logo on one side, and five vent holes on another side. Pro Mech is powered by 1 x 18650 battery (not included).
    Tank:
    The Tricktank PRO style RDTA features a large dual post style rebuildable deck for easy dual coil installation. Constructed from stainless steel and glass tank, The RDTA also features a 4ml e-juice capacity with a convenient side fill hole and large dual airflow channels that feed directly towards the coils for a constant and direct coil airflow, providing maximum flavor and massive vapor production.
    3FVape - Ultimate Mechanical Mod & Atomizer Store- Free Shipping

  3. #803
    AVF Regular
    Join Date
    Dec 2014
    Posts
    670
    SXK Tree of Life Mechanical Mod Clone Original Price $14.99,Now Only $6.99
    The SXK Tree of Life mechanical mod Clone set comes with 3 tubes to fit 18350 / 18490 / 18650 battery (battery not included). Copper contact provides stable connection and minimal voltage drop. The mechanical mod comes with spring fire button.

    SXK GIVO 57 Mechanical Mod Clone Original Price $14.99,Now Only $6.99
    The SXK GIVO 57 mechanical mod Clone set comes with telescoping tube to fit 18350 / 18490 / 18650 battery (battery not included). There are beautiful engraved patterns on top hat and the lower part of the mod. The mechanical mod comes with spring fire button.

    SXK Hades Mechanical Mod Clone Original Price $14.99,Now Only $6.99
    The SXK Hades mechanical mod Clone is made from stainless steel with 31.5mm diameter size. There are 6 vent holes on the bottom to prevent the battery overheating. This mechanical mod is powered by 1 x 26650 battery (not included). The mechanical mod comes with spring fire button.

    SXK Buffalo Mechanical Mod Clone Original Price $14.99,Now Only $6.99
    The SXK Buffalo mechanical mod Clone set comes with 3 tubes to fit 18350 / 18490 / 18650 battery (battery not included). Brass contact provides stable connection and minimal voltage drop. The mechanical mod comes with magnetic fire button.

    SXK Poldiac V2 Mechanical Mod Clone Original Price $14.99,Now Only $6.99
    The SXK Poldiac V2 Mechanical Mod Clone is constructed from stainless steel in 22mm diameter. The contacts in both the 510 connector and battery tube are adjustable, so your atomizer will sit flush with the top cap and your battery will not rattle. There are 8 air holes on the bottom cap to prevent the battery from over heat. The mod is powered by 1 x 18500 battery (not included) and comes with spring fire button.

    SXK First Mechanical Mod Clone Original Price $14.99,Now Only $6.99
    The SXK First Mechanical Mod Clone is constructed from stainless steel with copper contact pins. It comes with 2 horizontal slits on the tube for battery ventilation and spring bottom firing button with reverse threaded locking ring. The mod Supports both button top battery and flat top battery and is powered by 1 x 18350 / 18490 / 18650 battery (not included).

    SXK Cartel Mechanical Mod Clone Original Price $14.99,Now Only $9.99
    The SXK Cartel Mechanical Mod Clone set comes with 3 tubes to fit 18350 / 18490 / 18650 battery (battery not included). Silver plated copper contact provides stable connection and minimal voltage drop. The mechanical mod comes with spring fire button.

    SXK Stingray Mechanical Mod Clone Original Price $14.99,Now Only $6.99
    The SXK Cartel Mechanical Mod Clone set comes with 3 tubes to fit 18350 / 18490 / 18650 battery (battery not included). Silver plated brass contact provides stable connection and minimal voltage drop. The mechanical mod comes with magnetic fire button.

    SXK KingKong King Kong Mechanical Mod Clone Original Price $14.99,Now Only $6.99
    The SXK KingKong King Kong Mechanical Mod Clone is constructed from copper, which provides stable connection and minimal voltage drop. There are air holes on the tube for heat dissipation to prevent the battery from over heat. It is powered by 1 x 26650 battery (not included) and comes with magnetic fire button.

    Rogue Hybrid Mechanical Mod Clone $14.99
    The Rogue Mechanical Mod Clone is constructed from brass in 24mm diameter with beautiful butterfly pattern on the tube. It is powered by 1 x 18650 battery (not included). It features hybrid connection, side venting holes and magnet fire button. There is series number on the mod.
    3FVape - Ultimate Mechanical Mod & Atomizer Store- Free Shipping

  4. #804
    AVF Regular
    Join Date
    Dec 2014
    Posts
    670
    Original GeekVape AEGIS 100W Water-proof TC VW Variable Wattage Box Mod $69.00
    Enjoy promotion price by adding this item to shopping cart. Wholesale price (listed below) will also be discounted.
    Please Note: The fire button will be black on the product.
    Aegis is the newest water-proof box mod from Geekvape. It features water-proof IPX7, which means the Aegis will be able to withstand immersion in the water with one meter depth for up to 30 minutes. It will not cause damage to the mod in the swimming pool, getting caught in the rain, or drifting in river. Aegis houses one 18650 or 26650 battery and the power output can reach to maximum for 100W.

    YFTK Gani Mechanical Mod Clone $29.99
    The YFTK Gani Mechanical Mod Clone is constructed from brass with 27mm overall diameter. The top hat is compatible with 24mm diameter atomizers. The mod comes with spring fire button (gold plated spring) and features innovative anti-rattle system. It is powered by 1 x 18650 battery (not included).

    SXK 3D RDA Redbuildable Dripping Atomizer Clone for Nemesis Original Price $14.99,Now Only $4.59
    The SXK 3D RDA Clone is constructed from stainless steel in 22mm diameter and comes with three post that allow for a variety of build options. The 3D atomizer has an adjustable airflow ring providing sufficient airflow for single or dual coils. The 3D atomizer features a hybrid adapter pin allowing it to fit on top of Nemesis mods. The RDA is compatible with 510 drip tip (drip tip not included).

    SXK Anima RDA Rebuildable Dripping Atomizer Clone Original Price $14.99,Now Only $3.99
    The SXK Anima RDA Clone is constructed from stainless steel in 22mm diameter. The RDA features triple post style deck and side adjustable airflow. There are three different size airholes for different airflow configuration. The RDA comes with 510 drip tip.

    SXK Atomic RDA Redbuildable Dripping Atomizer Clone Original Price $14.99,Now Only $3.99
    Stainless steel construction;
    510 threading connection;
    Diameter: 22mm;
    Dual post build deck;
    Wide build deck with a lot of space for building

    SXK Caracela RDA Redbuildable Dripping Atomizer Clone Original Price $14.99,Now Only $3.99
    The SXK Caracela RDA Clone is constructed from stainless steel in 22mm diameter. The RDA features dual post style deck and there is much space for coil building. The RDA is compatible with 510 drip tip (drip tip not included).

    SXK Cat RDA Redbuildable Dripping Atomizer Clone Original Price $14.99,Now Only $4.59
    The SXK Cat RDA Clone is constructed from stainless steel in 22mm diameter. The RDA features single post style deck and there is much space for coil building. The airflow is adjustable with the airholes on the top side. 510 drip tip is included for this RDA.
    3FVape - Ultimate Mechanical Mod & Atomizer Store- Free Shipping

  5. #805
    AVF Regular
    Join Date
    Dec 2014
    Posts
    670
    SXK Crown RDA Redbuildable Dripping Atomizer Clone Original Price $14.99,Now Only $3.99
    The SXK Crown RDA Clone is constructed from stainless steel in 22mm diameter. The RDA features triple post style deck and side adjustable airflow. There are different size airholes for different airflow configuration. The RDA is compatible with 510 drip tip (drip tip not included).

    SXK Doge RDA Redbuildable Dripping Atomizer Clone Original Price $14.99,Now Only $4.59
    The SXK Doge RDA Clone is constructed from copper (cap, 510 pin) and stainless steel (base) in 22mm diameter. The RDA features single post style deck with much space for coil building and top heat sink for heat dissipation. The airflow is adjustable with the middle side airslots. The RDA is compatible with 510 drip tip (drip tip not included).

    SXK Dominatior RDA Redbuildable Dripping Atomizer Clone Original Price $14.99,Now Only $3.99
    The SXK Dominator RDA Clone is constructed from stainless steel in 22mm diameter. The RDA features triple post style deck and there is much space for coil building. The airflow is adjustable with the airholes on the middle side. The RDA is compatible with 510 drip tip (drip tip not included).

    SXK Eclipse RDA Redbuildable Dripping Atomizer Clone Original Price $14.99,Now Only $4.59
    The SXK Eclipse RDA Clone is constructed from stainless steel (inner cap, base) and brass (outer cap) in 22mm diameter. The RDA features triple post style deck and there is much space for coil building. The airflow is adjustable with the bottom AFC ring. The RDA is compatible with 510 drip tip (drip tip not included).

    SXK Enigma RDA Redbuildable Dripping Atomizer Clone Original Price $14.99,Now Only $3.99
    The SXK Enigma RDA Clone is constructed from stainless steel in 22mm diameter. The RDA features contoured top cap and triple post style deck with much space for coil building. The airflow is adjustable with the side airholes. The RDA is compatible with 510 drip tip (drip tip not included).This item also has many color to choose.

    SXK Geyser RDA Rebuildable Dripping Atomizer Clone Original Price $14.99,Now Only $4.59
    The SXK Geyser RDA Clone is an unique 22mm RDA that features 4 bottom airflows that can hand quad coils. The center teflon piece withstands high heat and is there to distribute the juice that you drip from the top. It also takes up space inside to create a more flavorful vape. There are 4 posts that have large post holes to hold even your thickest wire. The RDA is compatible with 510 drip tip (drip tip not included).

    SXK KR 454 RDA Rebuildable Dripping Atomizer Clone Original Price $14.99,Now Only $4.59
    The SXK KR 454 RDA Clone is with 4 negative terminals and 1 positive post for single, dual, or quad coil setup. It is unique design with no negative post, the entire outside of the atty is the negative post. The Delrin insulated drip tip prevents spit back and creates a vortex inside of the cap. Removable top cap for easy dripping and air fin cooled. Adjustable air control and direction flow outer cap. Center post has crossed drilled hole for large wire builds. The solid copper center post for superior conductivity.

    SXK Trillium Sub Ohm Tank Clone $17.90
    Enjoy promotion price by adding this item to shopping cart. Wholesale price (listed below) will also be discounted.
    The SXK Trillium Sub Ohm Tank Clone is constructed from 316 stainless steel in 22mm diameter. The RDA is compatible with Aspire Atlantis coil head and comes with bottom adjustable airflow. The tank can hold about 2ml e-liquid. 510 drip tip is included for this tank.

    SXK BB 60W All-in-One Box Mod Clone Kit $129.00
    The SXK BB Box mod Clone is constructed from aluminum with an all-in-one design. It is powered by 1 x 18650 battery (not included) and maximum power output is 60W. The box mod is powered Evolv DNA 60 chip.
    3FVape - Ultimate Mechanical Mod & Atomizer Store- Free Shipping

  6. #806
    AVF Regular
    Join Date
    Dec 2014
    Posts
    670
    Original VapeCige Creator DNA75C 75W TC VW Variable Wattage Box Mod $99.99
    The Original VapeCige Creator DNA75C 75W TC VW Box Mod adopts Evolv DNA 75C chip and is powered by dual 18650 batteries. It features a modern curved design and adopts Evolv's patented wattage control (max 75W), patent pending temperature protection, preheat, onboard buttons, synchronous rectification for maximum battery life and minimal heat generation.This item also has many color to choose.

    Original Aleader Funky 160W TC VW Variable Wattage Box Mod $51.99
    The Original Aleader Funky 160W box mod has beautiful interchangeable resin plates to satisfy your need to customize. Powered by 2 x 18650 batteries (not included), the output wattage can reach maximum 160W. The Funky 160W features a water resistant OLED display screen. Three power modes available: Soft, Standard, and Powerful. This mod allows you to go from 5 to 99.9W in 0.1W increments; when you go above 100W, the wattage increases in 1W increments all the way up to 160W. This mod also features 2A onboard charging for extra convenience.This item also has many color to choose.
    The resin plate is in random color.

    Original Augvape Druga RDA 24K Gold Limited Edition Rebuildable Dripping Atomizer with BF Pin $39.99
    Enjoy promotion price ($25.99) by adding this item to shopping cart. Wholesale price (listed below) will also be discounted.
    The Original Augvape DRUGA RDA Rebuildable Dripping Atomizer is a design that we have not seen before in RDA and probably in most atomizers engineering. DRUGA RDA is the first atomizer which uses CSS (Clamp Snag System) for it dual posts to make your coils installation easy peasy and it allows for a wider variety of coil structure compatibility.
    This RDA is 24K Gold Limited Edition.

    Original Augvape Druga RDA Rebuildable Dripping Atomizer with BF Pin $39.99
    Enjoy promotion price ($24.99) by adding this item to shopping cart. Wholesale price (listed below) will also be discounted.
    The Original Augvape DRUGA RDA Rebuildable Dripping Atomizer is a design that we have not seen before in RDA and probably in most atomizers engineering. DRUGA RDA is the first atomizer which uses CSS (Clamp Snag System) for it dual posts to make your coils installation easy peasy and it allows for a wider variety of coil structure compatibility.This item also has many color to choose.

    Weapon RDA Rebuildable Dripping Atomizer Clone $12.99
    The Weapon RDA Clone is constructed from stainless steel in 24mm diameter. It comes with two types of caps for different airflow and flavor configurations. The deck features dual post build deck with 5mm juice well for single or dual coil build. The taller cap comes with top and middle airflow, while the dome cap comes with only middle airflow.This item also has many color to choose.
    The drip tip included is random color.

    Original Smokjoy SV 26W 1100mAh All-in-One Starter Kit $34.99
    The Original Smokjoy SV All-in-One Starter Kit comes with built-in 1100mAh battery and 2ml capacity. Equipped with USA imported CPU, the kit will perform stably with full power output. The atomizer features adjustable airflow and heat resistant Ultem drip tip.This item also has many color to choose.

    Negus Kama Mechanical Mod Clone + Negus Kama RDA Clone Kit $48.99
    The mod kit consists of Negus Kama Mechanical Mod Clone and Negus Kama RDA Clone.This item also has many color to choose.
    Mod:
    The Negus Kama Mechanical Mod Clone is constructed from brass with a "slow twist" shape and gloss finish with resin inserts, which is very eye-catching and unique design. The mod is powered by 1 x 18650 battery (not included).
    RDA:
    The Negus Kama RDA Clone is constructed from brass with a "slow twist" shape and gloss finish with resin inserts, which is very eye-catching and unique design. The base is 24mm diameter and comes with dual post and much space for coil build. The RDA comes with middle side adjustable airflow.

    Original GAS Mods Replacement Top Cap for Nixon V1.5 RDTA $5.99
    The replacement top cap is made out of PC and is suitable for authentic GAS Mods Nixon V1.5 RDTA.This item also has many color to choose.
    3FVape - Ultimate Mechanical Mod & Atomizer Store- Free Shipping

  7. #807
    AVF Regular
    Join Date
    Dec 2014
    Posts
    670
    SXK Stingray Mechanical Mod Clone Original Price $14.99,Now Only $8.99
    The SXK Stingray Mechanical Mod Clone is constructed from stainless steel with copper battery contacts. The outer diameter is 30mm and inner is 26.8mm. It is powered by 1 x 26650 battery (not included). The mod comes with magnetic bottom fire button, engraved logo and series number on the tube.This item also has many color to choose.
    The mod will be shipped with random pattern (2 patterns).

    SXK Paragon V3 Mechanical Mod Clone Original Price $14.99,Now Only $6.99
    The SXK Paragon V3 Mechanical Mod Clone is constructed from aluminum with carbon fiber ring. It comes with silver plated brass battery contacts. The contacts on the top cap are adjustable to both directions. The venting holes are positioned at the top cap for battery safe. The mod comes with bottom spring fire button and is powered by 1 x 18650 battery (not included).

    SXK AR Mechanical Mod Clone Original Price $14.99,Now Only $6.99
    The SXK AR Mechanical Mod Clone is made from stainless steel with 4 rows of venting holes on the tube. The battery contacts are made out of copper. The mod is powered by 1 x 18650 battery (not included).

    SXK King Mechanical Mod Clone Original Price $14.99,Now Only $9.99
    The mechanical is made from stainless steel and with removable section to fit 18350 / 18490 / 18650 battery (battery not included). There is air airflow control ring on the top cap to prevent the battery from over heat.

    SXK Cartel Mechanical Mod Clone with Extra Top Cap Original Price $14.99,Now Only $9.99
    The SXK Cartel Mechanical Mod Clone is constructed from stainless steel with silver plated copper contacts for better conduction. The contacts on the top cap are screw adjustable. The mod comes with bottom spring fire button and is powered by 1 x 26650 battery (not included).
    An extra top cap is included.This item also has many color to choose.

    SXK Cartel Mechanical Mod Clone Original Price $14.99,Now Only $8.99
    The SXK Cartel Mechanical Mod Clone is constructed from copper with silver plated copper contacts for better conduction. The contacts on the top cap are screw adjustable. The mod comes with bottom spring fire button and is powered by 1 x 26650 battery (not included).This item also has many color to choose.

    Original Vandy Vape Pulse BF Squonk Mechanical Box Mod $28.99
    The Pulse BF Box Mod from Vandy Vape, is an affordable squonk mod for everyone. It features lockable power switch for safety concern, spring loaded 510 connection, 8ml food grade silicone bottle for squonking and replaceable front and back panels. The Pulse BF Box Mod is powered 1 x 20700 battery, and can be compatible with 18650 by using battery adapter (battery not included).This item also has many color to choose.

    SB Hybrid Mechanical Box Mod Clone $20.99
    The SB Mechanical box mod Clone is constructed from brass and POM and is powered by 1 x 18650 battery (not included). The battery access door is easy to remove by hand and the inner battery tube is insulated. The venting holes are positioned at the access door. The logo and series number are on the mod.

    Nipple RDA Rebuildable Dripping Atomizer Clone Original Price $10.99,Now Only $5.99
    The Nipple RDA Clone is constructed from food grade 316 stainless steel in 22mm diameter. The RDA comes with extra small chamber for extreme taste. The Nipple Style RDA supports single coil, dual coils, vertical and horizontal coil configuration. This RDA is perfect choice for both flavor and cloud chasers.

    Phoenix Fire Bird RDA Rebuildable Dripping Atomizer Clone Original Price $14.99,Now Only $9.99
    The Phoenix Fire Bird RDA Clone is constructed from 316 stainless steel with 22mm diameter. This RDA comes with triple poles design for single or dual coil build. The airflow is adjustable with 2 side airslots on the cap. The RDA comes with small bore drip tip for denser flavor.

    Original Omeka The Vanguard Shield RDTA Rebuildable Dripping Tank Atomizer $10.99
    The Original Omeka The Vanguard Shield RDTA is constructed from 316 stainless steel in 22mm diameter. The deck features velocity style dual post, 2 filling holes and 4 large cotton holes at the deck. The airflow is adjustable with 2 airslot on the side of the cap. Wide bore drip tip and 510 adapter are included for the RDTA.
    3FVape - Ultimate Mechanical Mod & Atomizer Store- Free Shipping

  8. #808
    AVF Regular
    Join Date
    Dec 2014
    Posts
    670
    VCMT RTA Rebuildable Tank Atomizer Clone $11.99
    The VCMT RTA Clone feature 25mm diameter and has a massive juice capacity of 6~7ml. The RTA is with top filling system by simply unthreading the top cap. The VCMT style RTA utilizes Velocity style deck for easy building, superior flavor, and colossal vapor production. The RTA is with an internal juice flow control ring rests in front of the juice channels to give you the perfect vape experience. The VCMT comes with both a delrin and stainless wide bore drip tip.This item also has many color to choose.

    Vape Breed Hybrid Mechanical Mod Clone + Atty 24 RDA Clone Kit $14.99
    This mod kit consists of an Vape Breed mechanical mod Clone and Vape Breed Atty 24 RDA Clone.
    Mod:
    The mechanical mod is constructed from brass and powered by 1 x 18650 battery (not included). There are venting slots on the tube for battery safe.
    RDA:
    The Vape Breed Atty 24 RDA Clone is constructed from stainless steel in 24mm diameter. It features side adjustable airflow and bottom airflow. The deck features two clamp style posts with four holes. Each post has two slot screws on top. It is easy to build both single and dual coils. The 510 protruding pin makes it compatible with hybrid mods. The RDA comes with removable POM wide bore drip tip.

    Replacement Drip Tip for Recoil Rebel Style RDA $1.39
    This drip tip is made out of POM and is suitable for Recoil Rebel Style RDA.
    Please note: only the following Recoil Rebel Style RDA's are compatible with this drip tip.

    Original GAS Mods 510 Drip Tip Set for Nixon V1.5 RDTA $5.99
    The drip tip set is suitable for Original GAS Mods Nixon V1.5 RDTA and consists of 1 x PC drip tip, 1 x PEI drip tip, 1 x POM drip tip, totally 3 PCS.

    Original Uwell Replacement Coil Head for Crown 3 Tank $10.99
    The Original Uwell Crown 3 0.4 ohm coil uses the SUS316 shell but uses an Kanthal A1 core for the wire. The 0.4 ohm Crown 3 coil features a wattage range of 55~65 watts.
    This product comes with 4 PCS in 1 pack.

    Original Vandy Vape Replacement Front + Back Panel for Pulse BF Squonk Box Mod $3.99
    The replacement front and back panels are suitable for the Original Vandy Vape Pulse BF Squonk Box Mod. The panel is magnetic structure design and is easy to replace.This item also has many color to choose.
    Panels only, the mod on image is for reference. This product comes with 1 x front panel and 1 x back panel, totally 2 PCS.

    Original Iwodevape Carrying Pouch Bag for E-Cigarette $4.99
    The Original Iwodevape carrying pouch bag is a bag for you to carry vaping devices or DIY tools on the go. This durable, practical, portable bag is a good choice for all vapors.This item also has many color to choose.

    SXK Replacement Top Cap for Hadaly RDA Clone $4.00
    The replacement top cap is made out of PEI and is suitable for SXK Hadaly RDA Clone.
    3FVape - Ultimate Mechanical Mod & Atomizer Store- Free Shipping

  9. #809
    AVF Regular
    Join Date
    Dec 2014
    Posts
    670
    Apocalypse Hybrid Mechanical Mod Clone $14.59
    The Apocalypse Hybrid Mechanical Mod Clone is constructed from stainless steel with carved pattern design, which looks really tough. It is powered by 1 x 18650 battery (not included) and comes with spring fire button. There is series number on the bottom side.This item also has many color to choose.

    GLM V2.5 Hybrid Mechanical Mod Clone $20.99
    The GLM V2.5 Mechanical Mod Clone is constructed from brass in 27mm diameter. It features unique designed body, hybrid connection, spring fire button and is powered by 1 x 20700 battery (not included).This item also has many color to choose.
    Please Note: This mod is without anti-oxidation process, please don't touch it with hands directly.

    PCC Team Mechanical Box Mod Clone $55.99
    The PCC Team Style Mechanical Box Mod is constructed from stabilized wood with beautiful wood grain. It is powered by 2 x 18650 batteries (not included, parallel connection). The fire button is positioned at the corner of top side. The battery access doors can be easily removed by hand.

    Original Desire X-Box 200W VW Variable Wattage Box Mod $55.99
    The Original Desire X-Box Mod features irregular geometric design with glowing logo and can support maximum 200W output power. The outstanding appearance and powerful function makes this mod unique.

    Original Vandy Vape MESH RDA Rebuildable Dripping Atomizer with BF Pin $24.99
    The Original Vandy Vape MESH RDA is 24mm atomizer with innovative design to be compatible with Mesh wire and standard coil. The invisible clamp style postless deck can rebuild with single coil, dual coils and single mesh wire. By inserting the tails into the slots and locking with side slotted screws, it is easy to finish the building. The RDA also features side adjustable airflow and comes with 810 Ultem drip tip and Doc tip.
    This RDA comes with bottom feeder pin.This item also has many color to choose.

    Rapture RDA Rebuildable Dripping Atomizer Clone $8.59
    The Rapture RDA Clone is constructed from copper (cap) and stainless steel (base) in 24mm diameter. The RDA's mounting tray includes dual clamp posts forming a bridge over the shelf for extra space. Very easy to handle, you will have no trouble making large or small coils. The juice well is deep enough for cotton and e-juice. The RDA comes with side adjustable airflow and bottom airflow and goon style wide bore drip tip.
    Please Note: This copper cap is without anti-oxidation process, please don't touch it with hands directly.This item also has many color to choose.

    Original Augvape Druga RDA Top Cap Kit with Drip Tip $14.59
    The top cap kit is suitable for Original Augvape Druga RDA, including one top cap, one 810 drip tip and one 510 adapter.This item also has many color to choose.

    Original GeekVape Athena Squonk Mechanical Box Mod + BF RDA Squonker Kit $99.00
    The Original Geekvape Athena Squonker Kit consists of Athena Squonk Box Mod and Athena BF RDA.
    Mod:
    The Athena Squonk Box Mod features 510 BF connection, oversized fire button and flip style magnetic battery cover. It is powered by 1 x 18650 battery (not included).
    RDA:
    The Athena BF RDA features gold plated postless deck for single or dual coil build, side adjustable airflow and bottom feeder pin for squonking.

    810 Replacement Drip Tip for TFV12 / TFV8 / TFV8 Big Baby Tank $2.59
    The 810 drip tip is made from resin in 13mm height. It is suitable for TFV8 Tank, TFV8 Big Baby Tank, TFV12 Tank, Goon RDA, Goon RTA, Lost Art Goon RDA, Goon LP RDA, Kennedy 24 / 25 RDA, Battle RDA, Kryten RDA, Mad Dog RDA, Mask RDA, CSMNT Cosmonaut RDA, Unholy RDA, Apocalypse GEN 2 RDA, Reload RDA, Mini Battle RDA, Avid Lyfe Captain Cap II, Sith RDA.
    3FVape - Ultimate Mechanical Mod & Atomizer Store- Free Shipping

  10. #810
    AVF Regular
    Join Date
    Dec 2014
    Posts
    670
    Original 528 Custom Replacement Top Cap Sleeve for Goon 1.5 RDA $11.99
    The Original 528 Custom replacement top cap sleeve is made from aluminum and is suitable for 528 Custom Goon 1.5 RDA atomizers.This item also has many color to choose.

    Original Claptonwire Mix Twisted Coils Kanthal A1 Heating Wire $1.99
    The Original Claptonwire Mix Twisted Coils is made from Kanthal A1 wires and features 0.45 ohm. This pre-coiled heating wire comes with 0.2 x 0.8GA + 26GA coils. This heating wire will be a good vaping choice for DIY.
    This product comes with 10 PCS in 1 pack.

    Original Claptonwire Twisted Coils Kanthal A1 Heating Wire $1.99
    The Original Claptonwire Twisted Coils is made from Kanthal A1 wires and features 0.6 ohm. This pre-coiled heating wire comes with 24GA x 2 coils. This heating wire will be a good vaping choice for DIY.
    This product comes with 10 PCS in 1 pack.

    Original Claptonwire Hive Coils Kanthal A1 Heating Wire $1.99
    The Original Claptonwire Hive Coils is made from Kanthal A1 wires and features 0.5 ohm. This pre-coiled heating wire comes with (30GA + 30GA) x 2 coils. This heating wire will be a good vaping choice for DIY.
    This product comes with 10 PCS in 1 pack.

    Original Claptonwire Tiger Coils Kanthal A1 Heating Wire $1.99
    The Original Claptonwire Tiger Coils is made from Kanthal A1 wires and features 0.3 ohm. This pre-coiled heating wire comes with 26GA + 0.2 x 0.8GA coils. This heating wire will be a good vaping choice for DIY.
    This product comes with 10 PCS in 1 pack.

    Original Claptonwire Quad Coils Kanthal A1 Heating Wire $1.99
    The Original Claptonwire Quad Coils is made from Kanthal A1 wires and features 0.36 ohm. This pre-coiled heating wire comes with 28GA x 4 coils. This heating wire will be a good vaping choice for DIY.
    This product comes with 10 PCS in 1 pack.

    Original Claptonwire Fused Clapton Coils Kanthal A1 Heating Wire $1.99
    The Original Claptonwire Fused Clapton Coils is made from Kanthal A1 wires and features 0.45 ohm. This pre-coiled heating wire comes with 0.3 x 0.8GA + 32GA coils. This heating wire will be a good vaping choice for DIY.
    This product comes with 10 PCS in 1 pack.

    Original Claptonwire Clapton Coils Kanthal A1 Heating Wire $1.99
    The Original Claptonwire Clapton Coils is made from Kanthal A1 wires and features 0.85 ohm. This pre-coiled heating wire comes with 26GA + 32GA coils. This heating wire will be a good vaping choice for DIY.
    This product comes with 10 PCS in 1 pack.

    Original Claptonwire Twisted Clapton Coils Kanthal A1 Heating Wire $1.99
    The Original Claptonwire Twisted Clapton Coils is made from Kanthal A1 wires and features 0.45 ohm. This pre-coiled heating wire comes with 28GA x 2 + 32GA coils. This heating wire will be a good vaping choice for DIY.
    This product comes with 10 PCS in 1 pack.
    3FVape - Ultimate Mechanical Mod & Atomizer Store- Free Shipping

 

 
Page 81 of 82 FirstFirst ... 317179808182 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBulletin® Version 4.2.4
Copyright © 2017 vBulletin Solutions, Inc. All rights reserved.
Search Engine Friendly URLs by vBSEO 3.6.0
All times are GMT +11. The time now is 05:54 AM.